Laser Welding of Stiffening Ribs to the Casing of a Jet Engine
The study addresses the results concerning the autogenous laser welding of T-joint with a butt weld used in the structure of casing panels. The joints were made of 1 and 1,5 mm thick AISI 17-4PH (X5CrNiCuNb16-4) steel. Exemplary welding parameters were determined. The influence of the beam setting...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Publishing Agency - Welding Technology Review
2018-05-01
|
| Series: | Przegląd Spawalnictwa |
| Subjects: | |
| Online Access: | http://www.pspaw.pl/index.php/pspaw/article/view/892 |
| Summary: | The study addresses the results concerning the autogenous laser welding of T-joint with a butt weld used in the structure of casing panels. The joints were made of 1 and 1,5 mm thick AISI 17-4PH (X5CrNiCuNb16-4) steel. Exemplary welding parameters were determined. The influence of the beam setting in relation to the interface of sheets over joint quality according to PN-EN ISO 13919-1 was investigated. An Actual Test Elements of the Casing with the Stiffening Ribs was welded. Limitations on the use of laser welding tech- nology related to the preparation of welding elements have been specified.
|
|---|---|
| ISSN: | 0033-2364 2449-7959 |