Combined athermal and isothermal martensite to austenite reversion kinetics, experiment and modelling

Combined athermal and isothermal martensite to austenite reversion kinetics, experiment and modelling

A novel laser heat treatment setup is presented and used to characterize the reverse transformation of martensite to austenite resulting from highly dynamic laser heat treatments of stainless steel. During laser heat treatments the irradiated spot and its surroundings can experience completely diffe...

Full description

Bibliographic Details
Main Authors:	H. Kooiker, E.S. Perdahcıoğlu, A.H. van den Boogaard
Format:	Article
Language:	English
Published:	Elsevier 2020-11-01
Series:	Materials & Design
Subjects:	Phase reversal Athermal transformation Thermally activated transformation Laser heat treatment Austenitic stainless steel Kinetic modelling
Online Access:	http://www.sciencedirect.com/science/article/pii/S0264127520306596

Similar Items

In-Situ Investigation of Strain-Induced Martensitic Transformation Kinetics in an Austenitic Stainless Steel by Inductive Measurements
by: Carola Celada-Casero, et al.
Published: (2017-07-01)

Mechanisms of the Reverse Martensite-to-Austenite Transformation in a Metastable Austenitic Stainless Steel
by: Dmitrii Panov, et al.
Published: (2021-04-01)

Effect of Nitrogen on Deformation-Induced Martensitic Transformation in an Austenitic 301 Stainless Steels
by: Jong Bae Jeon, et al.
Published: (2017-11-01)

Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties
by: Mohammad Shirdel, et al.
Published: (2015-06-01)

COMPOSITIONS OF ATHERMALIZED THREE-COMPONENT INFRARED OBJECTIVES
by: A. V. Muraviov, et al.
Published: (2015-08-01)

Effects of Heating Rate on Formation of Globular and Acicular Austenite during Reversion from Martensite
by: Xianguang Zhang, et al.
Published: (2019-02-01)

Effect of Grain Size on the Friction-Induced Martensitic Transformation and Tribological Properties of 304 Austenite Stainless Steel
by: Bo Mao, et al.
Published: (2020-09-01)

Mathematical Modelling of Isothermal Decomposition of Austenite in Steel
by: Božo Smoljan, et al.
Published: (2021-08-01)

Temperature Dependent Phase Transformation Kinetics of Reverted Austenite during Tempering in 13Cr Supermartensitic Stainless Steel
by: Yiwei Zhang, et al.
Published: (2019-11-01)

Austenite Reverse Transformation in a Q&P Route of Mn and Ni Added Steels
by: Maribel Arribas, et al.
Published: (2020-06-01)

Effect of martensite pre-quenching on bainite transformation kinetics, martensite/bainite duplex microstructures, mechanical properties and retained austenite stability of GCr15 bearing steel
by: Xiaohui Lu, et al.
Published: (2021-11-01)

Progress in effect of alloying element partition on thermodynamics and kinetics of pearlite transformation and its austenitization
by: YANG Ze-nan, et al.
Published: (2020-07-01)

Effects of Austenitizing Temperature on Tensile and Impact Properties of a Martensitic Stainless Steel Containing Metastable Retained Austenite
by: Biao Deng, et al.
Published: (2021-02-01)

Deformation mechanism of metastable austenitic steel with TRIP effect and associated kinetics of deformation induced martensitic transformation
by: Mao, Wenqi
Published: (2021)

Hydrogen Diffusion Mechanism around a Crack Tip in Type 304L Austenite Stainless Steel Considering the Influence of the Volume Expansion of Strain-Induced Martensite Transformation
by: Zhiliang Xiong, et al.
Published: (2019-09-01)

Effect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
by: H. Fathi, et al.
Published: (2019-09-01)

Isothermal Austenite–Ferrite Phase Transformations and Microstructural Evolution during Annealing in Super Duplex Stainless Steels
by: Andrea Francesco Ciuffini, et al.
Published: (2017-09-01)

Broadband Athermal Waveguides and Resonators With Low Anomalous Dispersion
by: Lijuan Xu, et al.
Published: (2021-01-01)

Transformation of the δ-Ferrite in SS2343 Austenitic Stainless Steel upon Annealing at 1050 °C, 1150 °C and 1250 °C
by: Boštjan Arh, et al.
Published: (2021-06-01)

A Review of Austenite Memory Effect in HAZ of B Containing 9% Cr Martensitic Heat Resistant Steel
by: Xiaogang Li, et al.
Published: (2019-11-01)

A Novel Cyclic-Quenching-ART for Stabilizing Austenite in Nb–Mo Micro-Alloyed Medium-Mn Steel
by: Chunquan Liu, et al.
Published: (2019-10-01)

Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding
by: Kh. Farjam Hajiagha, et al.
Published: (2017-09-01)

Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding
by: Kh. Farjam Hajiagha, et al.
Published: (2017-09-01)

Active athermalization of dual-infrared zoom lenses
by: G.I. Greisukh, et al.
Published: (2020-12-01)

DESIGN OF ATHERMALIZED INFRARED LENSES INVOLVING DIFFRACTIVE OPTICAL ELEMENTS
by: Garshin A.S., et al.
Published: (2018-10-01)

Warm Pre-Strain: Strengthening the Metastable 304L Austenitic Stainless Steel without Compromising Its Hydrogen Embrittlement Resistance
by: Yanfei Wang, et al.
Published: (2017-11-01)

Effect of Starting Microstructures on the Reverse Transformation Kinetics in Low-Carbon Steel
by: Junhua Hou, et al.
Published: (2020-11-01)

Design of an Athermal Interferometer Based on Tailored Subwavelength Metamaterials for On-Chip Microspectrometry
by: Umair A. Korai, et al.
Published: (2019-01-01)

A Continuum Model for the Effect of Dynamic Recrystallization on the Stress–Strain Response
by: H. Kooiker, et al.
Published: (2018-05-01)

Insight to the Influence of Ti Addition on the Strain-Induced Martensitic Transformation in a High (about 7 wt.%) Mn Stainless Steel
by: Saeed Sadeghpour, et al.
Published: (2020-04-01)

Effect of Thermomechanical Cycling on Martensitic Transformation and Shape Memory Effect in 304 Austenitic Steel
by: Jie Chen, et al.
Published: (2020-07-01)

Kovacs-Like Memory Effect in Athermal Systems: Linear Response Analysis
by: Carlos A. Plata, et al.
Published: (2017-10-01)

Mathematical Model and Simulation of Austenite Reverse Phase Transformation Process in Cold Rolled Low Carbon Steel
by: Su-fen Wang, et al.
Published: (2020-01-01)

Role of Reversed Austenite Behavior in Determining Microstructure and Toughness of Advanced Medium Mn Steel by Welding Thermal Cycle
by: Yunxia Chen, et al.
Published: (2018-10-01)

Precipitation in an austenitic steel containing niobium and nitrogen
by: Carvalho, M.
Published: (1985)

On the Issue of Athermal and Isothermal Martensites
by: S. P. Oshkadyorov
Published: (2011-12-01)

Processing and Properties of Reversion-Treated Austenitic Stainless Steels
by: Antti Järvenpää, et al.
Published: (2020-02-01)

Experimental Analysis of Residual Stresses in Samples of Austenitic Stainless Steel Welded on Martensitic Stainless Steel Used for Kaplan Blades Repairs
by: Vasile Cojocaru, et al.
Published: (2011-01-01)

Characterization of Austenite Microstructure from Quenched Martensite Using Conventional Metallographic Techniques and a Crystallographic Reconstruction Procedure
by: Lorena Sanz, et al.
Published: (2018-04-01)

Passive Athermal Optical Design Method Considering Thermal-Induced Surface Deformation
by: Tao Liu, et al.
Published: (2021-09-01)