Characteristics of Plastic Scintillators Fabricated by a Polymerization Reaction
Three plastic scintillators of 4.5 cm diameter and 2.5-cm length were fabricated for comparison with commercial plastic scintillators using polymerization of the styrene monomer 2.5-diphenyloxazole (PPO) and 1,4-bis benzene (POPOP). Their maximum emission wavelengths were determined at 426.06 nm, 42...
Main Authors: | Cheol Ho Lee, Jaebum Son, Tae-Hoon Kim, Yong Kyun Kim |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2017-04-01
|
Series: | Nuclear Engineering and Technology |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S1738573316301899 |
Similar Items
-
Characteristics of 3D Printed Plastic Scintillator
by: Kim Dong-geon, et al.
Published: (2020-01-01) -
Scintillator Pixel Detectors for Measurement of Compton Scattering
by: Mihael Makek, et al.
Published: (2019-02-01) -
Modeling and Reconstruction Strategy for Compton Scattering Tomography with Scintillation Crystals
by: Lorenz Kuger, et al.
Published: (2021-06-01) -
Performance of 3D printed plastic scintillators for gamma-ray detection
by: Dong-geon Kim, et al.
Published: (2020-12-01) -
Dose rate measurement of Leksell Gamma Knife Perfexion using a 3D printed plastic scintillation dosimeter
by: Sangmin Lee, et al.
Published: (2020-10-01)