Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites

Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites

<i>Objectives</i>: The objective of this study was to investigate the mechanical properties of high-impact (HI) heat-cured acrylic resin (PMMA) reinforced with silane-treated zirconia nanoparticles. <i>Methods</i>: Forty-five PMMA specimens reinforced with zirconia were fabri...

Full description

Bibliographic Details
Main Authors:	Saleh Zidan, Nikolaos Silikas, Suhad Al-Nasrawi, Julfikar Haider, Abdulrahman Alshabib, Alshame Alshame, Julian Yates
Format:	Article
Language:	English
Published:	MDPI AG 2021-06-01
Series:	Materials
Subjects:	dentistry prosthodontics PMMA zirconia (ZrO<sub>2</sub>) coupling agent silane
Online Access:	https://www.mdpi.com/1996-1944/14/12/3212

Similar Items

Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite
by: Saleh Zidan, et al.
Published: (2020-09-01)

Evaluating Polishability of Zirconia Impregnated PMMA Nanocomposite for Denture Base Application
by: Saleh Zidan, et al.
Published: (2021-05-01)

Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva
by: Saleh Zidan, et al.
Published: (2020-08-01)

Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites
by: Saleh Zidan, et al.
Published: (2020-06-01)

Investigating the Mechanical Properties of ZrO<sub>2</sub>-Impregnated PMMA Nanocomposite for Denture-Based Applications
by: Saleh Zidan, et al.
Published: (2019-04-01)

Flexural Strength and Hardness of Filler-Reinforced PMMA Targeted for Denture Base Application
by: Abdulaziz Alhotan, et al.
Published: (2021-05-01)

Assessing Fracture Toughness and Impact Strength of PMMA Reinforced with Nano-Particles and Fibre as Advanced Denture Base Materials
by: Abdulaziz Alhotan, et al.
Published: (2021-07-01)

Assessing Tensile Bond Strength Between Denture Teeth and Nano-Zirconia Impregnated PMMA Denture Base
by: Zidan S, et al.
Published: (2020-12-01)

Effect of Zirconia Polymorph on Vapor-Phase Ketonization of Propionic Acid
by: Shuang Ding, et al.
Published: (2019-09-01)

Potential of Ceria-Zirconia-Based Materials in Carbon Soot Oxidation for Gasoline Particulate Filters
by: Eleonora Aneggi, et al.
Published: (2020-07-01)

Dielectric Relaxation of La-Doped Zirconia Caused by Annealing Ambient
by: Werner M, et al.
Published: (2011-01-01)

Influence of Zirconia and Organic Additives on Mechanical and Electrochemical Properties of Silica Sol-Gel Coatings
by: Jolanta Gąsiorek, et al.
Published: (2021-05-01)

Preparation of Zirconia Nanofibers by Electrospinning and Calcination with Zirconium Acetylacetonate as Precursor
by: Vyacheslav V. Rodaev, et al.
Published: (2019-06-01)

Preparation of a Zirconia-Based Ceramic Membrane and Its Application for Drinking Water Treatment
by: Mohamed Boussemghoune, et al.
Published: (2020-06-01)

Reusable Nano-Zirconia-Catalyzed Synthesis of Benzimidazoles and Their Antibacterial and Antifungal Activities
by: Tentu Nageswara Rao, et al.
Published: (2021-07-01)

Development of Silane-Based Coatings with Zirconia Nanoparticles Combining Wetting, Tribological, and Aesthetical Properties
by: Sara Lopez de Armentia, et al.
Published: (2018-10-01)

Cellular Nickel-Yttria/Zirconia (Ni–YSZ) Cermet Foams: Manufacturing, Microstructure and Properties
by: Ulf Betke, et al.
Published: (2020-05-01)

Enhanced Thermal Properties of Zirconia Nanoparticles and Chitosan-Based Intumescent Flame Retardant Coatings
by: Tentu Nageswara Rao, et al.
Published: (2019-08-01)

Different Radiation Tolerances of Ultrafine-Grained Zirconia–Magnesia Composite Ceramics with Different Grain Sizes
by: Wenjing Qin, et al.
Published: (2019-08-01)

Morphology, mechanical properties and thermal degradation kinetics of PMMA-zirconia nanocomposites prepared by melt compounding
by: A. S. Luyt, et al.
Published: (2012-11-01)

Preparação e caracterização de catalisadores ácidos de zircônia sulfatada para aplicação na esterificação do óleo de algodão
by: F. N. Silva, et al.

Hydrogen Production by Partial Oxidation Reforming of Methane over Ni Catalysts Supported on High and Low Surface Area Alumina and Zirconia
by: Anis Fakeeha, et al.
Published: (2020-04-01)

<b>Efficient and convenient synthesis of symmetrical carboxylic anhydrides from carboxylic acids with sulfated zirconia by phase transfer catalysis</b>
by: Yu Lin Hu, et al.
Published: (2011-08-01)

Fracture toughness of yttrium stabilized zirconia sintered in conventional and microwave ovens
by: Marinis, Aristotelis
Published: (2011)

Effects of Veneering Ceramic and Methods on Failure Load of Veneered Zirconia
by: Hattanas Kumchai, et al.
Published: (2021-02-01)

Polyurethane/Silane-Functionalized ZrO<sub>2</sub> Nanocomposite Powder Coatings: Thermal Degradation Kinetics
by: Farimah Tikhani, et al.
Published: (2020-04-01)

The Effect of ZrO<sub>2</sub> as Different Components of Ni-Based Catalysts for CO<sub>2</sub> Reforming of Methane and Combined Steam and CO<sub>2</sub> Reforming of Methane on Catalytic Performance with Coke Formation
by: Wassachol Sumarasingha, et al.
Published: (2021-08-01)

Preparation and properties of black Ti-doped zirconia ceramics
by: Haodong Lv, et al.
Published: (2020-05-01)

In Situ Preparation and Corrosion Resistance of a ZrO<sub>2</sub> Film on a ZrB<sub>2</sub> Ceramic
by: Haitao Yang, et al.
Published: (2019-07-01)

THE EFFECT OFCARBON NANOTUBES ON THE SINTERING BEHAVIOR OF ZIRCONIA BASED MATERIALS
by: A. M. Zahedi, et al.
Published: (2015-12-01)

Spark Plasma Sintering (SPS) to the Mullite –Zirconia Ceramics Development
by: Gaida Sedmale, et al.
Published: (2015-03-01)

Dental Adhesion Enhancement on Zirconia Inspired by Mussel’s Priming Strategy Using Catechol
by: Minsu Park, et al.
Published: (2018-08-01)

Effects of the Layer Height and Exposure Energy on the Lateral Resolution of Zirconia Parts Printed by Lithography-Based Additive Manufacturing
by: Laura Conti, et al.
Published: (2020-03-01)

Mechanical and thermal properties of porous yttria-stabilized zirconia
by: Taro Shimonosono, et al.
Published: (2019-01-01)

Elaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties
by: Paola Palmero, et al.
Published: (2013-05-01)

A different zirconia precursor for Li7La3Zr2O12 synthesis
by: Fitria Rahmawati, et al.
Published: (2021-11-01)

A Double-Blind Crossover RCT Analyzing Technical and Clinical Performance of Monolithic ZrO<sub>2</sub> Implant Fixed Dental Prostheses (iFDP) in Three Different Digital Workflows
by: Aiste Gintaute, et al.
Published: (2021-06-01)

Comparing the Repair of Veneered Zirconia Crowns with Ceramic or Composite Resin: An in Vitro Study
by: Hattanas Kumchai, et al.
Published: (2020-04-01)

Dental zirconia: in-vitro comparison and outcome of methods for veneering, glazing, and chipping repairs
by: Kumchai, Hattanas
Published: (2016)

Chemical and Structural Characterization of Sandlasted Surface of Dental Implant using ZrO<sub>2</sub> Particle with Different Shape
by: Oleg Mishchenko, et al.
Published: (2019-03-01)