Toluene and Heavy Metals in Small Automotive Refinishing Shops and Personal Protection of the Workers in Nakhon Si Thammarat, Thailand

• Main Authors: Udomratana Vattanasit, Jutharat Sukchana, Saowalak Kongsanit, Patjamai Dumtip, Veenuttee Sirimano, Jira Kongpran
• Format: Article
• Language: English
• Published: Hindawi Limited 2021-01-01
• Series: Journal of Environmental and Public Health
• Online Access: http://dx.doi.org/10.1155/2021/8875666

Chemical contamination and safe work practices of workers in automotive refinishing shops have been extensively studied in industrialized countries, but the evidence in developing countries is limited. This study aimed to evaluate chemical contamination and the use of personal protective equipment (PPE) of workers in local small-scale automotive refinishing shops in Nakhon Si Thammarat, Thailand. Airborne toluene and heavy metals, i.e., lead, chromium, and cadmium, were measured in 3 automotive refinishing shops. Toluene exposure assessed by urinary hippuric acid (n = 27) and metal contamination on workers’ hands (n = 24) were also determined. Information on the use of PPE and personal hygiene practices of the workers was collected by questionnaires. Average ambient levels of toluene (0.04–18.26 ppm) and the metals (Pb: ND-26.34, Cr: 0.02–4.46, and Cd: ND-1.44 µg/m3) in all sites did not exceed the national standard levels of 200 ppm for toluene (1998) and 50, 12, and 5 µg/m3 for Pb, Cr, and Cd, respectively (2017). The mean ambient levels of these chemicals were highest in paint spray booths followed by nonpainting areas and office rooms, respectively. The highest level of urinary hippuric acid (1.13 g/g creatinine) was found in a painter but did not exceed the recommended biological exposure index of 1.6 g/g creatinine (2014). In contrast, the highest levels of lead and chromium detected on the workers’ hands were found in body repair technicians. Direct hand contact without using gloves was suggested as a primary cause of metal contamination.