| Summary: | Dripline flushing is an effective way to relieve emitter clogging and extend the longevity of drip irrigation systems. This laboratory study was conducted at Kunming University of Science and Technology to evaluate the effect of three targeted flushing velocities (0.3, 0.6, and 0.9 m/s) and four flushing frequencies (no flushing, flushing daily, and flushing every three or five days) on the emitter’s service life and the particle size distribution of the sediment discharged from emitters and trapped in an emitter channel. The gradation of particle size was analyzed by a laser particle size analyzer. The experiment results suggested that flushing velocity and flushing frequency had a significant effect on the service life of emitters, and the emitter’s service life was extended by 30.40% on average under nine different flushing treatments. Flushing can effectively reduce the accumulation of sediments in the dripline and decrease the probability of coarse particles flowing into emitters and fine particles aggregating and cementing in the labyrinth channel, thus relieving the emitter clogging. Therefore, dripline flushing can effectively slow down clogging in muddy water drip irrigation system. The recommended flushing velocity should be set at 0.6 m/s, and the flushing intervals should be shortened.
|
|---|
