Developing a Mathematical Model of a Part Based on Graphics System Models

• Main Authors: Sergey Yu. Kalyakulin, Vladimir V. Kuzmin, Eduard V. Mitin, Sergey P. Suldin, Tatiana B. Tyurbeeva
• Format: Article
• Language: English
• Published: National Research Mordova State University; MRSU 2019-03-01
• Series: Инженерные технологии и системы
• Subjects: technological process; mathematical model; parameterization; cad; design parameter; geometric drawing
• Online Access: http://vestnik.mrsu.ru/index.php/en/articles2-en/80-19-1/679-10-15507-0236-2910-029-201901-5

Introduction. The aim of the work is to develop a mathematical model of a part based on a parametric model of graphic systems. Material and Methods.The review of the status of the question of developing a mathematical model of a part based on graphic systems showed the possibility of controlling the geometric shape of a part through the variables of a parameterized drawing. A proposal was made to use design parameterization in the calculation of the parameters of technological processes in computer-aided design systems. Results. The article establishes links between the design parameters of the part drawing and tabular values of the variables. The revealed relationships between the parameters in the drawing and the variables in the table make it possible to change the geometric shape of the part by changing the values in the variable table, i.e. the drawing is managed through the table. It is proposed to use this system of work with the parametric drawing in computer-aided design systems for calculating the parameters of technological processes. Discussion and Conclusion. The tasks solved in this article allow making a step in increasing the level of automation of parameter calculations in computer-aided design systems. The implementation of the developed methodology for constructing mathematical models of parts based on graphic systems will increase the overall level of automation of developing geometric drawings of parts. The implementation of this technique in computer-aided design systems allows automating the calculation of parameters (cutting modes, time norms, technological dimensions on transitions, etc.).