Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy

Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy

The present article focuses on the influence of machining on the fatigue life of a titanium alloy: Ti6Al4V. An experimental design was adopted in order to highlight the effects of machining parameters on surface integrity while generating very different surfaces with a view to subsequent fatigue tes...

Full description

Bibliographic Details
Main Authors:	Kamel Moussaoui, Michel Mousseigne, Johanna Senatore, Remy Chieragatti, Pascal Lamesle
Format:	Article
Language:	English
Published:	MDPI AG 2015-06-01
Series:	Metals
Subjects:	machining residual stress surface integrity fatigue life titanium alloys
Online Access:	http://www.mdpi.com/2075-4701/5/3/1148

Similar Items

Effect of Double Cold Expansion of Hole on Fatigue Property of TB6 Titanium Alloy
by: LUO Xuekun, et al.
Published: (2017-12-01)

Overload effect on high cycle fatigue and crack propagation of some metastable beta titanium-vanadium alloys
by: Lee, Eui Whee
Published: (2006)

Microstructure-sensitive plasticity and fatigue of three titanium alloy microstructures
by: Smith, Benjamin Daniel
Published: (2013)

Dwell time low cycle fatigue in Ti-6242Si
by: Faber, Robyn O.
Published: (2012)

Effect of Cold Expansion on Fatigue Life of Hole Structure of TC17 Titanium Alloy
by: AI Yingjun, et al.
Published: (2017-12-01)

Residual Stress of a TC17 Titanium Alloy after Belt Grinding and Its Impact on the Fatigue Life
by: Yi He, et al.
Published: (2018-11-01)

Microstructural characterization of titanium alloys with fretting damage
by: Swalla, Dana Ray
Published: (2005)

Effect of underloads on fatigue crack growth of Ti-17
by: Russ, Stephan M.
Published: (2005)

The effects of deformation mode on the fatigue behavior of Ti-28%V and Ti-32%V alloys
by: Mukhopadhyay, Tapas Kumar
Published: (2006)

Three Dimensional Modeling of Ti-Al Alloys with Application to Attachment Fatigue
by: Mayeur, Jason R.
Published: (2005)

Experimental investigation of crack initiation and propagation in high- and gigacycle fatigue in titanium alloys by study of morphology of fracture
by: M.V. Bannikov, et al.
Published: (2015-12-01)

Experimental investigation of crack initiation and propagation in high- and gigacycle fatigue in titanium alloys by study of morphology of fracture
by: M.V. Bannikov, et al.
Published: (2016-01-01)

Influence of Fine Grains on the Bending Fatigue Behavior of Two Implant Titanium Alloys
by: Xiaojian Cao, et al.
Published: (2021-12-01)

Fatigue behaviour of titanium dental endosseous implants
by: Alessandro Scicutelli, et al.
Published: (2011-10-01)

Normal and dwell fatigue behavior of a near-alpha titanium alloy - IMI 834
by: Yazar K.U., et al.
Published: (2020-01-01)

Effect of Low Cycle Fatigue Predamage on Very High Cycle Fatigue Behavior of TC21 Titanium Alloy
by: Baohua Nie, et al.
Published: (2017-12-01)

Frequency and mean stress effects in high cycle fatigue of Ti-6A1-4V
by: Morrissey, Ryan J.
Published: (2007)

The fatigue crack growth behavior of Ti-24A1-11Nb as a function of temperature and load ratio
by: Bernard, Richard Joseph
Published: (2008)

Effect of lead angle of hole expansion mandrel on surface integrity and fatigue performance of TC17 titanium alloy hole structure
by: MA Shicheng, et al.
Published: (2021-08-01)

The effect of temperature and intermittent cyclic loading on the fatigue properties of Ti-6A1-4V alloy
by: Brar, Amarjit Singh, 1939-
Published: (1964)

Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling
by: Özyürek Dursun, et al.
Published: (2011-04-01)

Dwell fatigue property and fracture behaviour of Ti60 titanium alloy at room temperature
by: LIU Shi-shuang, et al.
Published: (2019-07-01)

Effects of WC-17Co Coating Combined with Shot Peening Treatment on Fatigue Behaviors of TC21 Titanium Alloy
by: Dongxing Du, et al.
Published: (2016-10-01)

Fatigue damage mechanisms of advanced hybrid titanium composite laminates
by: Rhymer, Donald William
Published: (2008)

Effects of Plasma ZrN Metallurgy and Shot Peening Duplex Treatment on Fretting Wear and Fretting Fatigue Behavior of Ti6Al4V Alloy
by: Jingang Tang, et al.
Published: (2016-03-01)

Notch Effect on the Fatigue Behavior of a TC21 Titanium Alloy in Very High Cycle Regime
by: Baohua Nie, et al.
Published: (2018-09-01)

Controlled Pre-Corrosion Attack and Ultrasonic Fatigue Endurance of Titanium Alloy Ti-6Al-4V
by: Ishvari F. Zuñiga Tello, et al.

Effect of morphology of primary a on fatigue crack propagation resistance in a near a heat resistant Titanium alloy
by: Sumi Y., et al.
Published: (2020-01-01)

Crack Initiation Mechanism and Life Prediction of Ti60 Titanium Alloy Considering Stress Ratios Effect in Very High Cycle Fatigue Regime
by: Chen, Y., et al.
Published: (2022)

Characterising the stress-life response of mechanical and laser formed titanium components
by: Fidder, Herman
Published: (2012)

Characterization of surface layer formed by gas blow induction heating nitriding at different temperatures and its effect on the fatigue properties of titanium alloy
by: Shogo Takesue, et al.
Published: (2020-03-01)

Biaxial fatigue behavior of commercially pure titanium Ti-50A (Grade 2) and low-alloy titanium Ti-Code 12 (Grade 12) heat exchanger materials
by: Tobias, Benjamin C.
Published: (2012)

Effect of TiB Orientation on Near-Threshold Fatigue Crack Propagation in TiB-Reinforced Ti-3Al-2.5V Matrix Composites Treated with Heat Extrusion
by: Shoichi Kikuchi, et al.
Published: (2019-11-01)

Small fatigue crack growth behavior of TB6 titanium alloy
by: XU Liang, et al.
Published: (2019-11-01)

Fatigue behavior and physical characterization of surface-modified Ti-6Al-4V ELI alloy by micro-arc oxidation
by: Fernanda Potomati, et al.
Published: (2012-04-01)

Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C
by: Zhang A.L., et al.
Published: (2013-08-01)

Effect of Ultrasonic Surface Impact on the Fatigue Properties of Ti3Zr2Sn3Mo25Nb
by: Zhangjianing Cheng, et al.
Published: (2020-05-01)

An Investigation on the Wear Resistance and Fatigue Behaviour of Ti-6Al-4V Notched Members Coated with Hydroxyapatite Coatings
by: Reza H Oskouei, et al.
Published: (2016-02-01)

An Ultra-High Frequency Vibration-Based Fatigue Test and Its Comparative Study of a Titanium Alloy in the VHCF Regime
by: Wei Xu, et al.
Published: (2020-10-01)

Effect of Basketweave Microstructure on Very High Cycle Fatigue Behavior of TC21 Titanium Alloy
by: Baohua Nie, et al.
Published: (2018-05-01)