Heat transfer and fluid flow analysis using nanofluids in diamond-shaped cavities with novel obstacles

• Main Authors: Alireza Aghaei, Suvanjan Bhattacharyya, Amin Dezfulizadeh, A.S. Goldanlou, S. Rostami, Mohsen Sharifpur
• Format: Article
• Language: English
• Published: Taylor & Francis Group 2021-01-01
• Series: Engineering Applications of Computational Fluid Mechanics
• Subjects: steady-state; natural convection; two-phase; nanofluid; heat transfer
• Online Access: http://dx.doi.org/10.1080/19942060.2021.1930170
• ISSN: 1994-2060; 1997-003X

This work computationally explores the two-phase flow of nanofluids and their thermal energy transport coefficients in 3D diamond-shaped cavities with square-shaped barriers having reducing dimensions. Materials with two emissivity values, $ \varepsilon=0.3 $ and 0.9, have been considered to investigate the effect of the radiation thermal energy transport coefficient while the hot side is maintained at 400 or 500 K. Two values of the Rayleigh number, Ra = 106 and 108, are used for the study. Cu nanoparticles (NPs) with an average size of 25 nm have been used at a concentration of 0.01–0.05% in the base fluid. The temperature gradients and thermal energy transport coefficient characteristics are enhanced by raising the volume concentration of nanoparticles, but the streamlines do not alter substantially. By increasing Ra, the thermal energy transport coefficient rate is further augmented. It is also found that increasing the Ra and volume concentration of NPs results in enhanced heat transfer inside a cavity, while a change in the emissivity coefficient has no significant impact on the thermal and flow characteristics of the nanofluid. For each case, there is an optimum NP volume fraction for each model that leads to the highest Nusselt number.