Plasmonic Band-Pass Microfilters for LWIR Absorption Spectroscopy

• Main Authors: J. M. Banks, P. D. Flammer, T. E. Furtak, R. E. Hollingsworth, R. T. Collins
• Format: Article
• Language: English
• Published: Hindawi Limited 2012-01-01
• Series: International Journal of Optics
• Online Access: http://dx.doi.org/10.1155/2012/916482

Absorption spectroscopy in the long wave infrared provides an effective method for identification of various hazardous chemicals. We present a theoretical design for plasmonic band-pass filters that can be used to provide wavelength selectivity for uncooled microbolometer sensors. The microfilters consist of a pair of input reflection gratings that couple light into a plasmonic waveguide with a central resonant waveguide cavity. An output transmission grating on the other side of the structure pulls light out of the waveguide where it is detected by a closely spaced sensor. Fabrication of the filters can be performed using standard photolithography procedures. A spectral bandpass with a full-width at half-maximum (FWHM) of 100 nm can be obtained with a center wavelength spanning the entire 8–12 μm atmospheric transmission window by simple geometric scaling of only the lateral dimensions. This allows the simultaneous fabrication of all the wavelength filters needed for a full spectrometer on a chip.