Design and Printing of a Low-Cost 3D-Printed Nasal Osteotomy Training Model: Development and Feasibility Study

• Main Authors: Ho, Michelle, Goldfarb, Jared, Moayer, Roxana, Nwagu, Uche, Ganti, Rohan, Krein, Howard, Heffelfinger, Ryan, Hutchinson, Morgan Leigh
• Format: Article
• Language: English
• Published: JMIR Publications 2020-11-01
• Series: JMIR Medical Education
• Online Access: http://mededu.jmir.org/2020/2/e19792/

BackgroundNasal osteotomy is a commonly performed procedure during rhinoplasty for both functional and cosmetic reasons. Teaching and learning this procedure proves difficult due to the reliance on nuanced tactile feedback. For surgical simulation, trainees are traditionally limited to cadaveric bones, which can be costly and difficult to obtain. ObjectiveThis study aimed to design and print a low-cost midface model for nasal osteotomy simulation. MethodsA 3D reconstruction of the midface was modified using the free open-source design software Meshmixer (Autodesk Inc). The pyriform aperture was smoothed, and support rods were added to hold the fragments generated from the simulation in place. Several models with various infill densities were printed using a desktop 3D printer to determine which model best mimicked human facial bone. ResultsA midface simulation set was designed using a desktop 3D printer, polylactic acid filament, and easily accessible tools. A nasal osteotomy procedure was successfully simulated using the model. Conclusions3D printing is a low-cost, accessible technology that can be used to create simulation models. With growing restrictions on trainee duty hours, the simulation set can be used by programs to augment surgical training.