Fabrication and Optimization of Polymer Solar Cells Based on P3HT:PC70BM System

Fabrication and Optimization of Polymer Solar Cells Based on P3HT:PC70BM System

Efficient bulk heterojunction (BHJ) polymer solar cells (PSCs) based on P3HT:PC70BM were fabricated by optimizing the processing parameters. The optimized thickness and annealing temperature have been found to be about 200 nm and 130°C. The effect of cathode interfacial layers on device performance...

Full description

Bibliographic Details
Main Authors:	Huangzhong Yu, Yanping Li, Yifan Dong, Xinxin Huang
Format:	Article
Language:	English
Published:	Hindawi Limited 2016-01-01
Series:	International Journal of Photoenergy
Online Access:	http://dx.doi.org/10.1155/2016/6725106

Similar Items

Thermal Transitions in P3HT:PC60BM Films Based on Electrical Resistance Measurements
by: Barbara Hajduk, et al.
Published: (2020-06-01)

Interfacial and Electrode Modifications in P3HT:PC61BM based Organic Solar Cells: Devices, Processing and Characterization
Published: (2015)

GaN Nanowire Array for Charge Transfer in Hybrid GaN/P3HT:PC<sub>71</sub>BM Photovoltaic Heterostructure Fabricated on Silicon
by: Giorgi Tchutchulashvili, et al.
Published: (2020-10-01)

Bis-Azide Low-Band Gap Cross-Linkable Molecule N3‑[CPDT(FBTTh2)2] to Fully Thermally Stabilize Organic Solar Cells Based on P3HT:PC61BM
by: Hussein Awada, et al.
Published: (2017-04-01)

Identification of green solvents for organic solar cells using P3HT and PC60BM
by: Vanhecke, Ruud
Published: (2015)

Investigation on Thermal Degradation Process of Polymer Solar Cells Based on Blend of PBDTTT-C and PC70BM
by: Yu Ning, et al.
Published: (2014-01-01)

Subnanosecond Charge Recombination Dynamics in P3HT/PC61BM Films
by: Jian-Ping Zhang, et al.
Published: (2012-11-01)

Dataset on the absorption of PCDTBT:PC70BM layers and the electro-optical characteristics of air-stable, large-area PCDTBT:PC70BM-based polymer solar cell modules, deposited with a custom built slot-die coater
by: Dimitar I. Kutsarov, et al.
Published: (2017-04-01)

The use of PC71BM as additive to improve the performanceof polymer solar cells
by: Tseng, Chen-yang, et al.
Published: (2018)

Effects of Additives on the Crystallization of PC71BM and the Efficiency of Polymer Solar Cells
by: Tsu-Che Yang, et al.
Published: (2018)

Enhanced Power Conversion Efficiency of P3HT : PC71BM Bulk Heterojunction Polymer Solar Cells by Doping a High-Mobility Small Organic Molecule
by: Hanyu Wang, et al.
Published: (2015-01-01)

Fabrications and Device Characterizations of Inverted Polymer Solar Cells Using PTB7:PC71BM as Active Layer
by: Ting-Hao Chen, et al.
Published: (2016)

HTPC: hora de trabalho perdido coletivamente?
by: Mendes, Cintia Cristina Teixeira [UNESP]
Published: (2014)

Comparative Investigation of Fullerene PC71BM and Non-fullerene ITIC-Th Acceptors Blended With P3HT or PBDB-T Donor Polymers for PV Applications
by: Francis Otieno, et al.
Published: (2021-05-01)

Study of the effect of solvent and molecular weight of TQ1 on the morphology of TQ1:PC60BM and TQ1:PC70BM spin coated systems
by: De Vlaemynck, Thijs
Published: (2018)

Fabrication and characterisation of high efficiency inverted P3HT:PCBM polymer solar cells
by: Kumar, Vikas
Published: (2014)

Data related to the PC71BM loading and it's impact on nanostructuring for blend of PBDTTT-EFT:PC71BM bulk heterojunction solar cell
by: Soheil Komilian, et al.
Published: (2018-02-01)

Integrated Effects of Two Additives on the Enhanced Performance of PTB7:PC71BM Polymer Solar Cells
by: Lin Wang, et al.
Published: (2016-03-01)

Optimization analysis of BisDMO-PFDTBT:PC71BM as the active layer of organic solar cells
by: Da-Sheng Hsieh, et al.
Published: (2019)

Fabrication of Hybrid Polymer Solar Cells By Inverted Structure Based on P3HT:PCBM Active Layer
by: Shobih Shobih, et al.
Published: (2017-08-01)

Enhanced Efficiency of PTB7 : PC61BM Organic Solar Cells by Adding a Low Efficient Polymer Donor
by: Joana Farinhas, et al.
Published: (2017-01-01)

Investigation on the Effects of Additive on Performance and Photostability of PCDTBT:PC71BM Solar Cells
by: Endale Tsegaye Mohammed, et al.
Published: (2019-01-01)

Optimization of SubPc and C70 based OPV Device Fabricated by Coevaporation Method
by: Ching-Wen Cheng, et al.
Published: (2013)

Hydrogen bonds in PC61BM solids
by: Chun-Qi Sheng, et al.
Published: (2015-09-01)

Degradation of P3HT:PCBM-based conjugated polymer solar cells
by: Shambayati, Shabnam
Published: (2011)

Degradation of P3HT:PCBM-based conjugated polymer solar cells
by: Shambayati, Shabnam
Published: (2011)

P3HT/PCBM/PMMA blended polymer solar cell study
by: Po-yu Chen, et al.
Published: (2010)

Degradation of P3HT:PCBM-based conjugated polymer solar cells
by: Shambayati, Shabnam
Published: (2011)

Adding PC71BM into the Photoactive Layer to Improve the Performance of Organic Ternary Solar Cells
by: LUO,JIN-WEN, et al.
Published: (2019)

Insight Into the Role of PC71BM on Enhancing the Photovoltaic Performance of Ternary Organic Solar Cells
by: Bei Wang, et al.
Published: (2018-06-01)

Fabrication of template wetted P3HT/PCBM nanorod array structure and applied for polymer heterojunction solar cell devices
by: Li-Hua Lin, et al.
Published: (2008)

Indium-Free PTB7/PC71BM Polymer Solar Cells with Solution-Processed Al:ZnO Electrodes on PET Substrates
by: P. Fuchs, et al.
Published: (2016-01-01)

Optimized Stoichiometry for CuCrO<sub>2</sub> Thin Films as Hole Transparent Layer in PBDD4T-2F:PC<sub>70</sub>BM Organic Solar Cells
by: Lorenzo Bottiglieri, et al.
Published: (2021-08-01)

Mídia-Educação : possibilidades na formação em serviço de professores em HTPC /
by: Feitosa, Érika Miranda Franco.
Published: (2018)

HTPC: HORÁRIO DE TRABALHO PEDAGÓGICO COLETIVO OU HORÁRIO DE TRABALHO PERDIDO?
by: Sousa, Paula Raquel Gonçalves de
Published: (2016)

Optimization of ClAlPc and C70 based Organic Photovoltaic Device Fabricated by Coevaporation Method
by: Bo-yao Huang, et al.
Published: (2014)

HTPC: heterogeneous traffic-aware partition coding for random packet spraying in data center networks
by: Jiawei Huang, et al.
Published: (2021-06-01)

Thermal stability enhancement of P3HT/PCBM solar cells by controlling the polymer regioregularity
by: Hung-Wei Liu, et al.
Published: (2009)

Spray-on PEDOT:PSS and P3HT:PCBM Thin Films for Polymer Solar Cells
by: Morteza Eslamian, et al.
Published: (2014-01-01)

Effects of Post-Annealing on the Physical Properties of P3HT:PCBM Polymer Solar Cells
by: Yu, Chen Te, et al.
Published: (2012)

Cannot write session to /tmp/vufind_sessions/sess_jonq7rgr3mliubjaaucasf7p3d