Modeling and optimization of cutting forces and effect of turning parameters on SiCp/Al 45% vs SiCp/Al 50% metal matrix composites: a comparative study
Abstract In this study, the proposed experimental and second-order model for the cutting forces were developed through several parameters, including cutting speed, feed rate, depth of cut, and two varying content of SiCp. Cutting force model was developed and optimized through RSM and compared for t...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Springer
2021-06-01
|
| Series: | SN Applied Sciences |
| Subjects: | |
| Online Access: | https://doi.org/10.1007/s42452-021-04689-z |