Static modeling of the dimensional chains of the hole center-finders
The article is devoted to estimate the center-finders accuracy for holes of large-sized case details. Methodology for analyzing center-finders accuracy using dimensional chains and computational mathematics is proposed. It is shown that the quality classes calculated for a direct task can be extende...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Institut za istrazivanja i projektovanja u privredi
2017-01-01
|
| Series: | Istrazivanja i projektovanja za privredu |
| Subjects: | |
| Online Access: | https://scindeks-clanci.ceon.rs/data/pdf/1451-4117/2017/1451-41171704505P.pdf |
| Summary: | The article is devoted to estimate the center-finders accuracy for holes of large-sized case details. Methodology for analyzing center-finders accuracy using dimensional chains and computational mathematics is proposed. It is shown that the quality classes calculated for a direct task can be extended. The methodology is applied to estimate the accuracy of center-finders with typical construction using the example of the specified tolerances for the deviation from alignment in the turbine K-300-240 and the diesel engine 10D100. As a result of calculating the dimensional chain for a direct task, the following values are obtained: 5 quality class for the first case, and 6 for the second case. To check for the inverse task, a computer program that calculates the closing link by the Monte Carlo method with Gaussian distribution is written. Based on the mutual influence of the center-finder supports, tolerances can be extended to 6 and 7 respectively, without accuracy loss. |
|---|---|
| ISSN: | 1451-4117 1821-3197 |