Stem diameter and rotational stability in revision total hip arthroplasty: a biomechanical analysis

• Main Authors: Paprosky Wayne G, Jacobs Joshua J, Berger Richard A, Hallab Nadim J, Meneghini R Michael, Rosenberg Aaron G
• Format: Article
• Language: English
• Published: BMC 2006-10-01
• Series: Journal of Orthopaedic Surgery and Research
• Online Access: http://www.josr-online.com/content/1/1/5
• ISSN: 1749-799X

<p>Abstract</p> <p>Background</p> <p>Proximal femoral bone loss during revision hip arthroplasty often requires bypassing the deficient metaphyseal bone to obtain distal fixation. The purpose of this study was to determine the effect of stem diameter and length of diaphyseal contact in achieving rotational stability in revision total hip arthroplasty.</p> <p>Methods</p> <p>Twenty-four cadaveric femoral specimens were implanted with a fully porous-coated stem. Two different diameters were tested and the stems were implanted at multiple contact lengths without proximal bone support. Each specimen underwent torsional testing to failure and rotational micromotion was measured at the implant-bone interface.</p> <p>Results</p> <p>The larger stem diameter demonstrated a greater torsional stability for a given length of cortical contact (p ≤ 0.05). Decreasing length of diaphyseal contact length was associated with less torsional stability. Torsional resistance was inconsistent at 2 cm of depth.</p> <p>Conclusion</p> <p>Larger stem diameters frequently used in revisions may be associated with less diaphyseal contact length to achieve equivalent rotational stability compared to smaller diameter stems. Furthermore, a minimum of 3 cm or 4 cm of diaphyseal contact with a porous-coated stem should be achieved in proximal femoral bone deficiency and will likely be dependent on the stem diameter utilized at the time of surgery.</p>