CHOICE OF OPMIMUM MATERIAL FOR STRENGTHENING THE ENTRANCE EDGES OF STEAM TURBINE ROTOR BLADES

CHOICE OF OPMIMUM MATERIAL FOR STRENGTHENING THE ENTRANCE EDGES OF STEAM TURBINE ROTOR BLADES

The influence of electrode material on the state of surfacing layer of steam turbine rotor blades is researched. The strengthened layer was produced by electro-spark alloying, using alloy T15K6 and steel 15X11МФШ. The microstructure, microhardness and thickness of surfacing layers were investigated....

Full description

Bibliographic Details
Main Authors:	D. Gluschcova, E. Grinchenko, Ye. Voronova
Format:	Article
Language:	English
Published:	Kharkiv National Automobile and Highway University 2016-12-01
Series:	Avtomobilʹnyj Transport (Harʹkov)
Subjects:	electro-spark alloying electrode surfacing layer microstructure microhardness strengthening
Online Access:	http://dspace.khadi.kharkov.ua/dspace/bitstream/123456789/1920/3/04.pdf

Similar Items

Microstructure and Wear Resistance of Ti6Al4V Coating Fabricated by Electro-Spark Deposition
by: Weifu Wang, et al.
Published: (2018-12-01)

Statistical Approach to Optimize the Process Parameters of HAZ of Tool Steel EN X32CrMoV12-28 after Die-Sinking EDM with SF-Cu Electrode
by: L’uboslav Straka, et al.
Published: (2017-01-01)

Synergistic Strengthening Effect of Reinforcing Spark Plasma Sintered Al-Zn-TiC Nanocomposites with TiC Nanoparticles
by: Hany S. Abdo, et al.
Published: (2021-07-01)

Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process
by: Wenquan Wang, et al.
Published: (2021-07-01)

On the correlation among continuous cooling transformations, interphase precipitation and strengthening mechanism in Ti-microalloyed steel
by: Songjun Chen, et al.
Published: (2021-01-01)

Data on assessment and exploratory statistical correlation data analysis of sintered Nd:YAG laser welded 2507 duplex stainless steel
by: Ayorinde Tayo Olanipekun, et al.
Published: (2020-10-01)

Influence of Coiling Temperature on Microstructure, Precipitation Behaviors and Mechanical Properties of a Low Carbon Ti Micro-Alloyed Steel
by: Mingxue Sun, et al.
Published: (2020-09-01)

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten via Spark Plasma Sintering
by: Xiao-Yu Ding, et al.
Published: (2016-10-01)

MICROSTRUCTURE AND MICROHARDNESS EVALUATION FOR NiCrAlY MATERIALS MANUFACTURED BY SPARK PLASMA SINTERING AND PLASMA SPRAYING
by: Iosif Hulka, et al.
Published: (2020-06-01)

Mass Erosion and Material Transfer at the Deposition of Layers by Inverse Electroerosion
by: Adrian ALEXANDRU, et al.
Published: (2008-05-01)

Assuring performance characteristics of gas-turbine engine parts and assemblies using electrospark doping
by: L. V. Denisov, et al.
Published: (2018-07-01)

Electro-impulse Method of Surface Cleaning
by: Bekbolat R. Nussupbekov, et al.
Published: (2013-01-01)

Bimodal Microstructure in an AlZrTi Alloy Prepared by Mechanical Milling and Spark Plasma Sintering
by: Orsolya Molnárová, et al.
Published: (2020-08-01)

ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides
by: Roman Husák, et al.
Published: (2019-10-01)

Interface microstructure and strengthening mechanisms of multilayer graphene reinforced titanium alloy matrix nanocomposites with network architectures
by: Caiyun Shang, et al.
Published: (2020-11-01)

Effective joining between oxide dispersion strengthened tungsten-based material (ODS-W) and TZM alloy via spark plasma sintering technology
by: Dong-Guang Liu, et al.
Published: (2021-03-01)

Tying Processing Parameters to the Microstructure and Mechanical Properties of Nanostructured FeNiZr Consolidated via the Field Assisted Sintering Technique
by: Sean J. Fudger, et al.
Published: (2019-04-01)

Influence of Ag Electrodes Asymmetry Arrangement on Their Erosion Wear and Nanoparticle Synthesis in Spark Discharge
by: Kirill Khabarov, et al.
Published: (2021-05-01)

Nanocrystalline Al7075 + 1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering
by: Orsolya Molnárová, et al.
Published: (2017-09-01)

Thermosyphon Method for Cooling the Rotor Blades of High-Temperature Steam Turbines
by: Bogomolov Alexander R., et al.
Published: (2016-01-01)

New blade tip-timing system for measuring rotor blade vibration of steam and gas turbines
by: Kowaleczko Piotr, et al.
Published: (2019-01-01)

ELECTRO SPARK DEPOSITION OF TIB2 LAYERS ON TI6AL4V ALLOY
by: Jaroslav Kováčik, et al.
Published: (2016-03-01)

SURFACE PLASTIC DEFORMATION OF ELECTRO-SPARK COATINGS
by: Mr. Sergei N. Khimukhin, et al.
Published: (2016-06-01)

Experimental Research on Water Droplet Erosion Resistance Characteristics of Turbine Blade Substrate and Strengthened Layers Materials
by: Juan Di, et al.
Published: (2020-09-01)

The Anode Material Selection for Electrospark Alloying (ESA) and its Mass Transition Phenomena
by: Zahid Ziyadkhan Sharifov, et al.
Published: (2017-12-01)

Microstructure and Isothermal Oxidation of Ir–Rh Spark Plug Electrodes
by: Shifang Zhao, et al.
Published: (2019-10-01)

Modified Nickel Nanowires for Electro-Catalytic Oxidation of Formaldehyde in Alkaline Solutions
by: Špela Trafela, et al.
Published: (2019-08-01)

Personal Care Wastewater Treatment With Electro-coagulation and Electro-oxidation
by: Ardhianto Rachmad, et al.
Published: (2019-01-01)

Research Status on Strengthening Mechanism of Particle-reinforced Metal Matrix Composites
by: YE Xiang-ping, et al.
Published: (2018-12-01)

The Effect of Milling Time on the Microstructural Characteristics and Strengthening Mechanisms of NiMo-SiC Alloys Prepared via Powder Metallurgy
by: Chao Yang, et al.
Published: (2017-04-01)

An EMI-Based Clustering for Structural Health Monitoring of NSM FRP Strengthening Systems
by: Ricardo Perera, et al.
Published: (2019-08-01)

Magnetic Field Generated during Electric Current-Assisted Sintering: From Health and Safety Issues to Lorentz Force Effects
by: Huaijiu Deng, et al.
Published: (2020-12-01)

The Electro-Spark Deposited WC-Cu Coatings Modified by Laser Treatment / Powłoki WC-Cu Naniesione Elektroiskrowo I Modyfikowane Obróbką Laserową
by: Radek N., et al.
Published: (2015-12-01)

Efficient De-colorization of Methylene Blue by Electro-coagulation Method: Comparison of Iron and Aluminum Electrode
by: Mostafa Alizadeh, et al.
Published: (2015-03-01)

On the performance of rotor blades in wet steam
by: Mashmoushy, Hisham Ahmad
Published: (1994)

Grain Size and Solid Solution Strengthening in Metals
by: Chandrasekaran, Dilip
Published: (2003)

Microstructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles
by: Ismaila Kayode Aliyu, et al.
Published: (2015-01-01)

The Influence of Milling and Spark Plasma Sintering on the Microstructure and Properties of the Al7075 Alloy
by: Orsolya Molnárová, et al.
Published: (2018-04-01)

A mechanical model for FRP-strengthened beams in bending
by: S. Bennati, et al.
Published: (2012-09-01)

A mechanical model for FRP-strengthened beams in bending
by: S. Bennati, et al.
Published: (2012-09-01)