Biomass Modification Using Cationic Surfactant Cetyltrimethylammonium Bromide (CTAB) to Remove Palm-Based Cooking Oil

• Main Authors: Amira Satirawaty Mohamed Pauzan, Normala Ahad
• Format: Article
• Language: English
• Published: Hindawi Limited 2018-01-01
• Series: Journal of Chemistry
• Online Access: http://dx.doi.org/10.1155/2018/5059791

Adsorption based on natural fibre seems to widely used for oily wastewater recovery due to its low cost, simplicity, feasibility, easy handling, and effectiveness. However, oil sorbent based on natural fibre without modification has low adsorption capacity and selectivity. Thus, this paper proposes chemical modification of sago hampas to improve its adsorbent efficiency for the removal of palm-based cooking oil. The chemical modification was performed using a cationic surfactant, cetyltrimethylammonium bromide (CTAB). The chemical and surface properties of both unmodified and modified sago hampas were characterized by Fourier-Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM). Parameters studied for the removal of cooking oil using modified sago hampas were sorption time, adsorbent dosage, and initial pH. The removal capacity was also compared using unmodified sago hampas. The results showed that additional functional groups were introduced on the surface of modified sago hampas. Modified sago hampas also showed a greater porosity than unmodified sago hampas. These properties enhanced the adsorption of palm-based cooking oil onto the surface of modified sago hampas. Modified sago hampas shows better removal of palm-based cooking oil than unmodified sago hampas, where 84.82% and 68.08% removal were achieved by modified and unmodified sago hampas, respectively. The optimum adsorption of palm-based cooking oil was identified at 45 min sorption time, pH 2, and 0.2 g adsorbent dosage.