Development of methods for cutting force components determination when milling aviation materials

Development of methods for cutting force components determination when milling aviation materials

Bibliographic Details
Main Author:	Anton E. Gubanov, Aleksandr A. Moskvitin, Tatiana A. Duyun
Format:	Article
Language:	Russian
Published:	Irkutsk National Research Technical University 2019-10-01
Series:	Вестник Иркутского государственного технического университета

Similar Items

Investigation of cutting force oscillations when high productivity milling
by: Aleynikov Dmitry, et al.
Published: (2018-01-01)

Study on model for cutting force when milling SCM440 steel
by: Nguyen Van Thien, et al.
Published: (2021-09-01)

Artificial neural network modelling of cutting force components in milling
by: Zagórski Ireneusz, et al.
Published: (2017-01-01)

Investigation of Cutting Force and Cutting Force Coefficient of Milling with the application of neural
by: Hung-Chi Wei, et al.
Published: (2017)

Study of cutting force and cutting dynamics in End Milling
by: Yuan-Ming Cheng, et al.
Published: (2000)

Investigation of Cutting Forces and Cutting Coefficient for Milling Process
by: Hung-Yu ,Yan, et al.
Published: (2014)

The analysis of cutting forces in face milling
by: 高進鎰
Published: (1992)

Evaluation of the Cutting Force Components and the Surface Roughness in the Milling Process of Micro- and Nanocrystalline Titanium
by: Habrat W., et al.
Published: (2016-09-01)

The Modeling of Cutting Force in High-speed Milling for End Mill
by: Yueqi Guan, et al.
Published: (2014-08-01)

The influence of mechanical properties of workpiece material on the main cutting force in face milling
by: M. Sekulić, et al.
Published: (2010-10-01)

An analytical method to determine cutting force coefficients in micro ball end milling
by: Yen-Ming Huang, et al.
Published: (2014)

Investigation of Cutting Force and Cutting Force Coefficient for Rake Angle of Cutter in Milling Process
by: Yen-Sheng Chang, et al.
Published: (2015)

An investigation on the cutting force of milling Inconel 718
by: Tsai Jhy-Cherng, et al.
Published: (2018-01-01)

Upgraded Kalman Filtering of Cutting Forces in Milling
by: Giovanni Totis, et al.
Published: (2020-09-01)

The analysis of the structure of cutting force in milling processes
by: Wu, Jeng-Yih, et al.
Published: (1998)

Simulation of End Milling Cutting Forces with The Consideratioin
by: Hu, Jau Yu, et al.
Published: (1996)

An Investigation on Cutting Force of High-Speed Milling
by: Yi-Keng Liu, et al.
Published: (2001)

Cutting Forces in Peripheral Up-Milling of Particleboard
by: Bartosz Pałubicki
Published: (2021-04-01)

Study of Cutting Force in End Milling and Cutting Resistance Coefficients Estimation
by: Shun-Te Hsiao, et al.
Published: (2001)

Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis
by: Zhenjing Duan, et al.
Published: (2021-02-01)

An investigation into the chip section and cutting forces during milling operations
by: Sabberwal, A. J. P.
Published: (1961)

Effects of cutting conditions on forces and force coefficients in plunge milling operations
by: Francesco Rafanelli, et al.
Published: (2015-06-01)

ARTIFICIAL NEURAL NETWORK MODELLING OF CUTTING FORCE COMPONENTS DURING AZ91HP ALLOY MILLING
by: Monika KULISZ, et al.
Published: (2016-12-01)

Modeling of Cutting Forces with a Serrated End Mill
by: Yu Guo, et al.
Published: (2019-01-01)

Cutting forces in gear machining by disk milling cutters
by: S. Pasternak, et al.
Published: (2018-05-01)

A Dynamic Model of Cutting Forces in End Milling
by: Yi-Jen Wang, et al.
Published: (1993)

An Investigation on The Cutting Force Model for Ball End Mill
by: Ming-Liang Lin, et al.
Published: (2002)

An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling
by: Marija Dragan Mandić, et al.
Published: (2015-07-01)

Cutting Force and Dimensional Error Prediction Models for General End Mill Cutting
by: Kun-Xian Lu, et al.
Published: (2008)

Cutting Force and Cutting Quality during Tapered Milling of Glass Magnesium Board
by: Pingxiang Cao, et al.
Published: (2019-06-01)

Cutting Force Modeling and Investigation of Cutting Force Coefficients in Three-axis Flat-end Milling Processes
by: Nhu-Tung Nguyen, et al.
Published: (2015)

Determination of Forces Affecting the Cutter During Shoe Materials Cutting
by: А. Romanovich, et al.
Published: (2018-01-01)

DYNAMOMETRIC EQUIPMENT FOR MEASURING THE COMPONENTS OF CUTTING STRENGTHS WHEN PROCESSING MATERIALS WITH AXIAL TOOLS
by: R. V. Guseynov
Published: (2018-06-01)

A Model for Predicting Dynamic Cutting Forces in Sand Mould Milling with Orthogonal Cutting
by: Zhong-De Shan, et al.
Published: (2018-12-01)

Thermal modelling of cooling tool cutting when milling by electrical analogy
by: Benmoussa H., et al.
Published: (2010-06-01)

Analysis of friction and cutting parameters when milling honeycomb composite structures
by: Tarik Zarrouk, et al.
Published: (2021-07-01)

The influence of cutting temperature on machinability when end milling inconel-718
by: 蔡忠甫
Published: (2003)

Identification of Cutting Force Coefficients in Ball-End Milling Process
by: Ming-Hung Hung, et al.
Published: (2006)

A study on the identification of milling parameters via cutting forces
by: Chang, Jin-Xian, et al.
Published: (1998)

Analysis of Milling Stability Based on Cutting Force Signal Processing
by: TRAN MINH QUANG, et al.
Published: (2017)