Comparison of the Performance of Photovoltaic Power Generation-Consumption System with Push-Pull Converter under the Effect of Five Different Types of Controllers
In this study, a dynamic system has been modeled to efficiently use a photovoltaic generation and control system (PVGCS) for driving of a medium power off-grid electric machine. The measures have been taken to respond to three different disturbing factors in this system. First, the photovoltaic pane...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2019-01-01
|
| Series: | International Journal of Photoenergy |
| Online Access: | http://dx.doi.org/10.1155/2019/3810970 |
| Summary: | In this study, a dynamic system has been modeled to efficiently use a photovoltaic generation and control system (PVGCS) for driving of a medium power off-grid electric machine. The measures have been taken to respond to three different disturbing factors in this system. First, the photovoltaic panels selected for energy generation have a variable solar radiation effect. Second, the DC motor load at the system output is assumed to have a variable torque. Third, a variable reference voltage, which is determined even in the case of time-varying energy generation and consumption of the system, is followed with minimum error. For this purpose, a push-pull converter has been chosen as a highly flexible structure since it is predicted that it can provide stable and effective variable DC voltage at increasing and decreasing level required for DC motor. The control of the DC voltage at different levels to be provided by the push-pull converter is performed by PI, fuzzy logic, fuzzy-tuned PI, 2-DOF PI, and fractional PID logic whose coefficients are selected by appropriate methods, respectively. The system efficiency and stability under the influence of these five different advanced controllers are compared. In the case of two disturbing factors affecting the system, the difference values (errors) of the voltage generated by each selected controller with the reference voltage are determined comparatively. The studies were carried out by using dynamic system modeling in MATLAB-SIMULINK software. In addition, the results of this study proved which type of controllers is more successful in controlling systems with the second order and more instability factors and which of them responds to sudden changes in errors more quickly. |
|---|---|
| ISSN: | 1110-662X 1687-529X |