Water distribution characteristics of spray nozzles in a cooling tower

Water distribution characteristics of spray nozzles in a cooling tower

Water distribution characteristics of spray nozzles with spray plates used to distribute cooling water to the cooling fills in a cooling tower is one of the important parameters for the selection of nozzles. Water distribution characteristic describes the distribution of water from the axis of the n...

Full description

Bibliographic Details
Main Author:	Vitkovic Pavol
Format:	Article
Language:	English
Published:	EDP Sciences 2015-01-01
Series:	EPJ Web of Conferences
Online Access:	http://dx.doi.org/10.1051/epjconf/20159202109

Similar Items

Control of droplet size in rain-zone in wet cooling tower
by: Vitkovicova Rut, et al.
Published: (2018-01-01)

Control of droplet size in rain-zone in wet cooling tower
by: Vitkovicova Rut, et al.
Published: (2018-01-01)

Characterization of Impinged Water Spray Distribution in a Cooling Tower
by: XIAO, YU-XIAN, et al.
Published: (2019)

Comparison on cooling performance of pre-cooled natural draft dry cooling towers using nozzles spray and wet medium
by: Jiayu Miao, et al.
Published: (2021-10-01)

Experimental study effect of diameter and number of spray nozzle holes on counterflow cooling tower to improve cooling effectiveness
by: Fahruddin A'rasy, et al.
Published: (2018-01-01)

Design of medium pressure nozzles for cooling towers
by: Thacker, John Edward
Published: (2012)

Experimental Study on Effect of Water Spray Characteristics on Performance of Cooling Tower
by: Dhurandhar Akshay S., et al.
Published: (2020-01-01)

Effects of multiple-nozzle distribution on large-scale spray cooling via numerical investigation
by: Xie Qiang, et al.
Published: (2019-01-01)

Evaluation and performance prediction of cooling tower spray zones
by: Viljoen, D. J.
Published: (2008)

Evaluation and performance enhancement of cooling tower spray zones
by: Roux, Daniel
Published: (2012)

Influence of distance between water distribution and grid fill on water drop size
by: Vitkovic Pavol
Published: (2017-01-01)

Simultaneous effects of water spray and crosswind on performance of natural draft dry cooling tower
by: Ahmadikia Hossein, et al.
Published: (2013-01-01)

Nozzle analysis and heat transfer model for spray cooling of glass fibers
by: Sweetland, Matthew, 1970-
Published: (2005)

Analysis of Flow Field and Heat Transfer Characteristics of Spray Cooling through A Twin-fluid Nozzle
by: Jhen Lin, et al.
Published: (2018)

Enhancement of the Heat Transfer Efficiency of Closed Wet Cooling Tower by a Water Spray Method
by: Siripol Tongorn, et al.
Published: (2021-06-01)

Prediction of the Impact of Nozzle Geometry on Spray Characteristics
by: Mahmoud Abd El-Aziz Mohamed, et al.
Published: (2021-02-01)

Effect of Intake Manifold and Nozzles on the Characteristics of the Spray
by: Sih-Jyue Lin, et al.
Published: (2006)

The Effect of Variable Gravity on the Cooling Performance of a 16-Nozzle Spray Array
by: Elston, Levi J.
Published: (2008)

Numerical simulation of single-nozzle large scale spray cooling on drum wall
by: Chen Zuobing, et al.
Published: (2018-01-01)

Study of the Characteristics of the Spray of Nozzles Used on a Motorcycle
by: Jia-Long Cai, et al.
Published: (2005)

Estimation of the distribution of water and air flows in a laboratory cooling tower
by: A. I. Badriev, et al.
Published: (2019-12-01)

Characteristics of Rain and Sea Spray Droplet Size Distribution at a Marine Tower
by: Hiroki Okachi, et al.
Published: (2020-11-01)

Dispersion of water sprays in a transverse air jet and the aging of spray nozzles
by: Eletribi, Shereen, 1975-
Published: (2007)

ON THE EFFECT OF WATER EVAPORATION ON COOLING EFFICIENCY IN COOLING TOWERS
by: Sergey A. Shevelev, et al.
Published: (2019-03-01)

Spray nozzle distribution analysis with computerized electronic weighing
by: Thornton, Eric Allen
Published: (1986)

Effect of Viscosities on the Spray Characteristics of Pressure Swirl Nozzle
by: Z. M. Liu, et al.
Published: (2020-01-01)

The biodeterioration of timber in water cooling towers
by: Eaton, R. A.
Published: (1969)

Numerical Investigation on the Thermodynamic Characteristics of a Liquid Film upon Spray Cooling Using an Air-Blast Atomization Nozzle
by: Jia-Xin Li, et al.
Published: (2020-03-01)

The Process Development of Spray Nozzles in Spraying Textiles
by: TSAO,CHIA-CHIN, et al.
Published: (2017)

Close Nozzle Spray Characteristics of a Prefilming Airblast Atomizer
by: Simon Holz, et al.
Published: (2019-07-01)

Experimental investigation into spray characteristics from a novel nozzle
by: Liu, Weiping
Published: (2005)

Water Conservation Analysis for a Cooling Tower
by: Po-Cheng Hsieh, et al.
Published: (2004)

Analysis of the influence of the spraying angle on the distribution of sprinkling intensity by a selected Turbo water nozzle
by: Piątek Piotr, et al.
Published: (2018-01-01)

Spray nozzle performance on wheat
by: Matilde Mur, et al.
Published: (2020-08-01)

Cooling nozzles characteristics for numerical models of continuous casting
by: R. Pyszko, et al.
Published: (2013-10-01)

SPRAY JET OF DIESEL NOZZLE
by: Chen Hsuan Ssu, et al.
Published: (1995)

The impact of fog nozzle type on the distribution of mass spray density
by: Wąsik Wiktor, et al.
Published: (2018-01-01)

Influence of detergents on water drift in cooling towers
by: Vitkovicova Rut
Published: (2017-01-01)

Predictive Factors of Contamination in Cooling Tower Water
by: Pipat Luksamijarulkul, et al.
Published: (2014-01-01)

Ozone Treatment and Water Reuse for Cooling Tower
by: Shu-Hai You, et al.
Published: (1999)