Microstructure and Corrosion Resistance of Zn-Al Diffusion Layer on 45 Steel Aided by Mechanical Energy

• Main Authors: Jianbin Tong, Yi Liang, Shicheng Wei, Hongyi Su, Bo Wang, Yuzhong Ren, Yunlong Zhou, Zhongqi Sheng
• Format: Article
• Language: English
• Published: MDPI AG 2019-09-01
• Series: Materials
• Subjects: Zn-Al diffusion layer; mechanical energy aided diffusion; microstructure; corrosion resistance; electrochemistry
• Online Access: https://www.mdpi.com/1996-1944/12/18/3032
• ISSN: 1996-1944

In harsh environments, the corrosion damage of steel structures and equipment is a serious threat to the operational safety of service. In this paper, a Zn-Al diffusion layer was fabricated on 45 steel by the Mechanical Energy Aided Diffusion Method (MEADM) at 450 °C. The microstructure and composition, the surface topography, and the electrochemical performance of the Zn-Al diffusion layer were analyzed before and after corrosion. The results show that the Zn-Al diffusion layer are composed of Al₂O₃ and Γ₁ phase (Fe11Zn40) and δ₁ phase (FeZn_6.67, FeZn_8.87, and FeZn_10.98) Zn-Fe alloy. There is a transition zone with the thickness of about 5 μm at the interface between the Zn-Al diffusion layer and the substrate, and a carbon-rich layer exists in this zone. The full immersion test and electrochemical test show that the compact corrosion products produced by the initial corrosion of the Zn-Al diffusion layer will firmly bond to the Zn-Al diffusion layer surface and fill the crack, which plays a role in preventing corrosion of the corrosive medium and reducing the corrosion rate of the Zn-Al diffusion layer. The salt spray test reveals that the initial corrosion products of the Zn-Al diffusion layer are mainly ZnO and Zn₅(OH)₈Cl₂H₂O. New corrosion products such as ZnAl₂O₄, FeOCl appear at the middle corrosion stage. The corrosion product ZnAl₂O₄ disappears, and the corrosion products Zn(OH)₂ and Al(OH)₃ appear at the later corrosion stage.