Combined Technology for the Parts Recovery Operating in Stress Factor Conditions

• Main Authors: Olena V. Berezshnaya, Valeriy D. Kassov, Eduard P. Gribkov
• Format: Article
• Language: English
• Published: Hindawi Limited 2020-01-01
• Series: Advances in Materials Science and Engineering
• Online Access: http://dx.doi.org/10.1155/2020/9684726

The structural factor of samples microplasticity deposited with carbon steel construction tapes in connection with the different sensitivities of the deposited metal to stress concentration was investigated. The most favorable structure of the deposited layer, which is characterized by low sensitivity to stress concentration, is found. The combined technology of parts recovery modes operating in stress factor conditions is given. The covering agent composition, which allows to reduce the energy consumption during heat treatment of the deposited samples after treatment with high-frequency currents, to increase the thermal insulation effect approaching to the furnace treatment conditions, was developed. It was established that retarded cooling in the covering agent of deposited samples after local heating with high-frequency currents provides the increase in the average pressure ferrite during increase in the grain size. It was established that for parts operating under cyclic loading, the structure obtained as a result of combined treatment is the least sensitive to stress concentration.