Torque Ripple Suppression in an External-Meshed Magnetic Gear Train

Torque Ripple Suppression in an External-Meshed Magnetic Gear Train

Magnetic gear trains transmit torque through noncontact magnetic couplings rather than conjugate gear teeth; they have the unique advantages of reduced maintenance and improved reliability, inherent overload protection, high efficiency, precise peak torque transmission, and tolerance for misalignmen...

Full description

Bibliographic Details
Main Authors:	Yi-Chang Wu, Wan-Tsun Tseng, Yueh-Tung Chen
Format:	Article
Language:	English
Published:	SAGE Publishing 2013-01-01
Series:	Advances in Mechanical Engineering
Online Access:	https://doi.org/10.1155/2013/178909

Similar Items

Theoretical Investigation into the Ripple Source of External Gear Pumps
by: Xinran Zhao, et al.
Published: (2019-02-01)

Torque Ripple Control of Permanent Magnet Brushless Motor
by: Chang-Yen Chen, et al.
Published: (2000)

Harmonic Suppression and Torque Ripple Reduction of a High-Speed Permanent Magnet Spindle Motor
by: Haining Zhao, et al.
Published: (2021-01-01)

Reducing torque ripples in permanent magnet synchronous motor
by: Rihab Abdelmoula, et al.
Published: (2017-09-01)

Design of Low-Torque-Ripple Synchronous Reluctance Motor with External Rotor
by: Lavrinovicha L., et al.
Published: (2017-02-01)

On the evaluation of the meshing stiffness of external spur gears
by: Pleguezuelos Miguel, et al.
Published: (2020-01-01)

Gear mesh geometry effect on performance improvement for external gear pumps
by: Ivanov Viktor, et al.
Published: (2019-01-01)

Cogging Torque, Torque Ripple and Radial Force Analysis of Permanent Magnet Synchronous Machines
by: Islam, Mohammed Rakibul
Published: (2009)

Active torque ripple reduction in permanent-magnet AC motors
by: Greamo, Christopher Anthony
Published: (2007)

A Low Torque Ripple Direct Torque Control Method for Interior Permanent Magnet Motor
by: Min-Fu Hsieh, et al.
Published: (2020-03-01)

Direct torque control of permanent magnet brushless AC/DC drives with reduced torque ripple
by: Liu, Yong
Published: (2007)

An Axial Magnetic Gear With Improved Torque Density and Reduced Cogging Torque
by: J. Sepaseh, et al.
Published: (2021-12-01)

Torque Ripple Minimization and Performance Investigation of an In-Wheel Permanent Magnet Motor
by: A. Mansouri, et al.
Published: (2016-06-01)

Torque Ripple Minimization and Performance Investigation of an In-Wheel Permanent Magnet Motor
by: A. Mansouri, et al.
Published: (2016-06-01)

Study of Fuzzy Control for Torque-Ripple Reduction of The Switched Reluctance Motor with External Rotor
by: Ruey-Der Lin, et al.
Published: (2003)

A Numerical Analysis of an Innovative Flow Ripple Reduction Method for External Gear Pumps
by: Gianluca Marinaro, et al.
Published: (2021-01-01)

Cogging Torque and Torque Ripple Reduction Design of Dual Three Phase Permanent Magnet Electric Machine
by: Chen, Li-Jhen, et al.
Published: (2018)

Model Predictive Direct Torque Control of a Permanent Magnet Synchronous Motor for Torque Ripple Reduction
by: Zih-JiaZeng, et al.
Published: (2019)

Permanent Magnet Motor Design for Satellite Attitude Control With High Torque Density and Low Torque Ripple
by: Po-Huan Chou, et al.
Published: (2020-01-01)

Low Torque Ripple Direct Torque Control for IPM Motor
by: Yun-ChungWeng, et al.
Published: (2018)

Torque Ripple Minimization in Direct Torque Control of Induction Machines
by: Abdalla, Abdelnassir
Published: (2005)

Torque Ripple Suppression of PMSM Based on Robust Two Degrees-of-Freedom Resonant Controller
by: Mingfei Huang, et al.
Published: (2021-02-01)

External Gear Pump Transmission Torque Analysis, Minim Umnumber Of Teeth Of The External Gear Pump Cycloid And Performance Test Production
by: Che-Lin Yeh, et al.
Published: (2013)

Towards Miniaturization of Magnetic Gears: Torque Performance Assessment
by: Efren Diez-Jimenez, et al.
Published: (2017-12-01)

Optimization Design of Transmitted Torques for Magnetic Gear Mechanisms
by: Geng-Cyuan Li, et al.
Published: (2012)

Influence of rotational speed and torque on meshing efficiency of double helical gear transmission system
by: Wang Cheng
Published: (2021-01-01)

Torque Load Effect on Multi-Point Mesh and Dynamics of Right-angle Geared Drives
by: Wang, Yawen
Published: (2013)

Torque-Ripple and Load-Disturbance Compensation in Harmonic Drive System
by: Wei-Lin Tseng, et al.
Published: (2007)

Development of Torque Ripple Estimation and Compensation Methods for Permanent Magnet Synchronous Motors
by: HONG, MENG-JIE, et al.
Published: (2018)

Reducing Torque Ripples of the Axial Flux PM Motors by Magnet Stepping and Shifting
by: E. Cetin, et al.
Published: (2018-02-01)

Analysis of Torque Ripple of a Spoke-Type Interior Permanent Magnet Machine
by: Guoyu Chu, et al.
Published: (2020-06-01)

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents
by: Cezary Jędryczka, et al.
Published: (2020-04-01)

Torque ripple reduction in direct torque control of induction motor drives
by: Toh, C.L, et al.
Published: (2003)

Torque Ripple Reduction Design for Direct Torque Control of Induction Motor
by: Deng-Mao Wang, et al.
Published: (2009)

TORQUE REGULATION AND RIPPLE REDUCTION FOR HYBRID MOTORS
by: Sheau-Jen Huang, et al.
Published: (1995)

Electronic control of torque ripple in brushless motors
by: Kocybik, Peter Franz
Published: (2000)

A Fuzzy Approach to the Improvement of Torque-Ripple for Switched Reluctance Motors
by: Yen-Jui Tseng, et al.
Published: (2013)

An Investigation into the Torque Capabilities of High Gear Ratio Magnetic Gearboxes
by: Li, Kang
Published: (2018)

Fourier Series Learning Control for Torque Ripple Minimization in Permanent Magnet Synchronous Motors
by: Eduardo Espíndola-López, et al.
Published: (2016-09-01)

COMPENSATION ALGORITHMS OF TORQUE RIPPLE FOR PRECISION ELECTRIC DRIVE WITH PERMANENT-MAGNET SYNCHRONOUS MOTOR
by: V. S. Tomasov, et al.
Published: (2013-03-01)