Analysis of the applicability of a common rail pump for an aircraft engine
The paper presents an analysis of the possibility of using a common rail pump to supply an aircraft compression-ignition engine. It is an engine with a two-stroke cycle, three cylinders, opposing pistons and 100 kW power. Its each combustion chamber is supply by one or two injectors controlled by el...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Polskie Towarzystwo Naukowe Silników Spalinowych/Polish Scientific Society of Combustion Engines
2019-10-01
|
| Series: | Combustion Engines |
| Subjects: | |
| Online Access: | http://www.journalssystem.com/cen/,116195,0,2.html |
| Summary: | The paper presents an analysis of the possibility of using a common rail pump to supply an aircraft compression-ignition engine. It is an engine with a two-stroke cycle, three cylinders, opposing pistons and 100 kW power. Its each combustion chamber is supply by one or two injectors controlled by electromagnetic valves. In order to assess the possibility of using a common rail pump, four high-pressure pumps were tested on a bench. They are piston pumps differing in the number and geometry of their pumping sections. The analysis included the pumping output, the torque on the pump drive shaft and the power needed to drive the pump. The weight and overall dimensions of the pump were also considered, including the arrangement of the pumping sections and the way the drive is transmitted. The research allowed to optimize the engine power supply system depending on fuel demand and the way the pump is mounted on the engine. |
|---|---|
| ISSN: | 2300-9896 2658-1442 |