Influence of the semi‐rigid bolted steel joints on the frame behaviour
This research work describes the analysis of steel semi rigid joints that are subjected to bending and tension or compression. The main attention is focussed on the beam‐to‐beam and plate bolted joints. Usually influence of axial force is neglected. In fact, the level of tension or compression of a...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Vilnius Gediminas Technical University
2010-06-01
|
| Series: | Journal of Civil Engineering and Management |
| Subjects: | |
| Online Access: | https://journals.vgtu.lt/index.php/JCEM/article/view/5944 |
| Summary: | This research work describes the analysis of steel semi rigid joints that are subjected to bending and tension or compression. The main attention is focussed on the beam‐to‐beam and plate bolted joints. Usually influence of axial force is neglected. In fact, the level of tension or compression of axial force can be significant and has some impact on joint behaviour and on its stiffness and strength characteristics. Nowadays the most powerful method for the estimation of joints characteristics is the component method. The adaptation of the component method for the determination of joints characteristics under bending ant axial forces is shown in the paper. Some numerical results of calculations of steel frameworks are presented in this paper as well (Daniūnas and Urbonas 2008).
Santrauka
Straipsnyje nagrinejami pusiau standūs mazgai, veikiami lenkiamojo momento ir tempimo ar gniuždymo ašines jegos. Daugiausia demesio skiriama sijos, sujungtos varžtais per galines plokšteles su kita sija, mazgui. Dažniausiai teigiama, kad ašines jegos itaka mazgo elgsenai yra nereikšminga. Iš tikruju gniuždymo ar tempimo ašines jegos dydis gali būti reikšmingas ir daryti svaria itaka mazgo elgsenai, sukamojo standžio ir lenkiamosios galios reikšmems. Populiariausias ir plačiausiai šiuo metu taikomas metodas mazgo charakteristikoms nustatyti yra komponentu metodas. Šiame straipsnyje rodoma, kaip taikomas komponentu metodas nustatyti mazgo, veikiamo lenkiamojo momento ir ašines jegos, charakteristikoms. Pateikiami ir plieniniu reminiu konstrukciju skaičiavimu rezultatai (Daniūnas, Urbonas 2008).
First Published Online: 24 Jun 2011
Reikšminiai žodžiai: plienines konstrukcijos, pusiau standūs mazgai, momento ir pasisukimo kreive, sukamasis standis, lenkiamoji galia, remo elgsena
|
|---|---|
| ISSN: | 1392-3730 1822-3605 |