Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling

A statistical approach for the characterization of Additive Manufacturing (AM) processes is presented in this paper. Design of Experiments (DOE) and ANalysis of VAriance (ANOVA), both based on Nested Effects Modeling (NEM) technique, are adopted to assess the effect of different laser exposure strat...

Full description

Bibliographic Details
Main Authors:	Biagio Palumbo, Francesco Del Re, Massimo Martorelli, Antonio Lanzotti, Pasquale Corrado
Format:	Article
Language:	English
Published:	MDPI AG 2017-02-01
Series:	Materials
Subjects:	Additive Manufacturing (AM) Direct Metal Laser Sintering (DMLS) Design of Experiments (DOE) Nested Effects Modeling (NEM) ANalysis of VAriance (ANOVA)
Online Access:	http://www.mdpi.com/1996-1944/10/2/144

Similar Items

From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
by: Eleonora Atzeni, et al.
Published: (2013-03-01)

Direct Metal Laser Sintering of Precious Metals for Jewelry Applications: Process Parameter Selection and Microstructure Analysis
by: Mohamed Selim Korium, et al.
Published: (2021-01-01)

Comparative study of cytotoxicity of direct metal laser sintered and cast Co-Cr-Mo dental alloy
by: T. Puskar, et al.
Published: (2015-07-01)

Fatigue Response of As-Built DMLS Maraging Steel and Effects of Aging, Machining, and Peening Treatments
by: Dario Croccolo, et al.
Published: (2018-06-01)

Impact of Process Parameters on the Diameter of Nanobubbles Generated by Electrolysis on Platinum-Coated Titanium Electrodes Using Box–Behnken Experimental Design
by: Karol Ulatowski, et al.
Published: (2021-04-01)

Preference of rabbit does among different nest materials
by: T.P. Farkas, et al.
Published: (2018-03-01)

Estimation of the Effect of Production Parameters on Mechanical Properties of Sintered Steels using ANOVA
by: Sułowski M., et al.
Published: (2017-06-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-06-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-07-01)

Recent e-Manufacturing solutions developed by EOS
by: Langer, H.J., et al.
Published: (2015)

Perbaikan Desain Produk Reamer Menggunakan Metode Taguchi Untuk Memaksimalkan Durability
by: Hery Hamdi Azwir, et al.
Published: (2020-09-01)

Thin Films Deposition of Ta<sub>2</sub>O<sub>5</sub> and ZnO by E-Gun Technology on Co-Cr Alloy Manufactured by Direct Metal Laser Sintering
by: Diana-Irinel Băilă, et al.
Published: (2021-06-01)

Direct Metal Laser Sintering of Ti6Al4V for Biomedical Applications: Microstructure, Corrosion Properties, and Mechanical Treatment of Implants
by: Janette Brezinová, et al.
Published: (2016-07-01)

Investigation of support structures of a polymer powder bed fusion process by use of Design of Experiment (DoE)
by: Westbeld, Julius
Published: (2018)

PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY
by: Josef Sedlak, et al.
Published: (2015-08-01)

A New Statistical Trend in Medical Research – Nested Design
by: Ogoke Uchenna Petronilla
Published: (2021-03-01)

Application of Design of Experiment Method for Thrust Force Minimization in Step-feed Micro Drilling
by: Eung-Sug Lee, et al.
Published: (2008-01-01)

Enhanced Multi-Objective Teaching-Learning-Based Optimization for Machining of Delrin
by: Elango Natarajan, et al.
Published: (2018-01-01)

Optimization of fatigue strength of selective inhibition sintered polyamide 12 parts using RSM
by: Sisay Mesfin, et al.
Published: (2020-01-01)

Optimization and Prediction of Reaction Parameters of Plastic Pyrolysis oil Production Using Taguchi Method
by: Gopinath S, et al.
Published: (2020-04-01)

Influence of Build Orientation, Heat Treatment, and Laser Power on the Hardness of Ti6Al4V Manufactured Using the DMLS Process
by: Anna Guzanová, et al.
Published: (2017-08-01)

Microstructure and mechanical properties of direct metal laser sintered TI-6AL-4V
by: Becker, Thorsten Hermann, et al.
Published: (2015-05-01)

Effect of Process Parameters on Surface Roughness and Porosity of Direct Metal Laser Sintered Metals
by: Patibandla, Aditya Ramamurthy
Published: (2018)

Sintering the beaks of the elevator manufactured by direct metal laser sintering (DMLS) process from Co - Cr alloy
by: D. I. Băilă, et al.
Published: (2016-10-01)

Direct Metal Laser Sintering – Possibility of Application in Production Process
by: Darina Dupláková, et al.
Published: (2018-12-01)

Experimental investigation and prediction of tribological behavior of unidirectional short castor oil fiber reinforced epoxy composites
by: Rajesh Egala, et al.
Published: (2020-07-01)

A Comparative Analysis of the Corrosive Effect of Artificial Saliva of Variable pH on DMLS and Cast Co-Cr-Mo Dental Alloy
by: Tatjana Puskar, et al.
Published: (2014-09-01)

Modeling and optimization of jojoba oil extraction yield using Response Surface Methodology
by: Iyad Al-Sheikh, et al.
Published: (2019-09-01)

INVESTIGATION OF HALF-TONE MOTTLE IN COATED PAPERS BY VARYING GRAVURE PROCESS PARAMETERS
by: AKSHAY V. JOSHI
Published: (2018-09-01)

Utilization of Optimization of Internal Topology in Manufacturing of Injection Moulds by the DMLS Technology
by: Tomas Coranic, et al.
Published: (2021-12-01)

Custom-made 3D printed subperiosteal titanium implants for the prosthetic restoration of the atrophic posterior mandible of elderly patients: a case series
by: Carlo Mangano, et al.
Published: (2020-01-01)

Tensile Behavior of Sintered Stainless Steel Fiber Felts: Effect of Sintering Joints and Fiber Ligaments
by: Jun Ma, et al.
Published: (2018-09-01)

Statistical Modelling of Print half-tone mottle in PET-G and PVC Shrink Films
by: Akshay V Joshi
Published: (2016-11-01)

Microstructure Development in Direct Metal Laser Sintered Inconel Alloy 718
Published: (2017)

Comparison of conventional reconstruction plate versus direct metal laser sintering plate: an in vitro mechanical characteristics study
by: Pusheng Xie, et al.
Published: (2017-09-01)

CMOS-NEMS Copper Switches Monolithically Integrated Using a 65 nm CMOS Technology
by: Jose Luis Muñoz-Gamarra, et al.
Published: (2016-02-01)

Application of Rapid Prototyping Technology in the Manufacturing of Turbine Blade With Small Diameter Holes
by: Deja Mariusz, et al.
Published: (2018-05-01)

Contact Angle Measurements at the Interface of Co-Cr Alloy Sintered by DMLS and Coated with Hydroxyapatite
by: Diana-Irinel Băilă, et al.
Published: (2020-01-01)

A Six Sigma Approach to Implementing Conformal Cooling on Existing Processes in Injection Molding
by: Jack, William Josiah
Published: (2017)

Analysis of direct metal laser sintering ‒ DMLS and heat treatment influence on the Inconel 713C nickel alloy structure
by: Jakub Ciftci, et al.
Published: (2021-08-01)