Parameter identification of pulsed eddy current testing equivalent circuit model and its application to defect evaluation

• Main Authors: Zhiyuan Xu, Shanwei Fan, Tiejun Song
• Format: Article
• Language: English
• Published: SAGE Publishing 2021-05-01
• Series: Measurement + Control
• Online Access: https://doi.org/10.1177/00202940211020341
• ISSN: 0020-2940

The equivalent circuit model of pulsed eddy current testing (PECT) has simple mathematics but its applications are limited to qualitative analysis such as principle illustration and signal interpretation. In this paper, the parameters of equivalent circuit model are estimated using system identification method and quantitative relationships are found between some of the parameters and the size of the defect. The equivalent circuit equations were solved from the perspective of system analysis to yield the system transfer function. An m -sequence of 10 order was selected to excite the system and the probe current was used as the output. A set of experiment input-output data for system identification were obtained by performing experiments on two aluminium alloy 6061 slabs, one of which was machined with five slots of different widths, and the other one was machined with five depth-varied slots. The equivalent circuit parameters were finally estimated based on the identified transfer function parameters. It is found that the values of resistance and self-inductance of the secondary windings decrease greatly and monotonically with the increase of the slot width or depth. The self-inductance is more sensitive to the slot size variation than the resistance. Both of them have the potential to serve as the signal feature for defect evaluation in PECT applications.