Amplification of Radiation-Induced Signal of LED Strip by Increasing Number of LED Chips and Using Amplifier Board
Transducers, such as photodiodes, phototransistors, and photovoltaic cells are promising radiation detectors. However, for accurate radiation detection and dosimetry, signals that emanate from these devices have to be sufficient to facilitate accurate calibrations, i.e., assigning a quantity of radi...
Main Authors: | Edrine Damulira, Muhammad Nur Salihin Yusoff, Ahmad Fairuz Omar, Nur Hartini Mohd Taib |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2020-01-01
|
Series: | Applied Sciences |
Subjects: | |
Online Access: | https://www.mdpi.com/2076-3417/10/2/651 |
Similar Items
-
Simulasi Pencahayaan Buatan untuk Ruang Kelas dengan Tipe Armature TL LED dan Bohlam LED
by: Arimaz Hangga, et al.
Published: (2020-12-01) -
LEDs: Sources and Intrinsically Bandwidth-Limited Detectors
by: Roberto Filippo, et al.
Published: (2017-07-01) -
Comparison of Current–Voltage Response to Diagnostic X-rays of Five Light-Emitting Diode Strips
by: Edrine Damulira, et al.
Published: (2019-12-01) -
Study of the relation between kVp and X-ray tube output of general X-ray machine at Hua Hin Hospital, Prachuap Khiri Khan
by: Chawee Bunkloy
Published: (2017-09-01) -
A New High-Performance LED Converter With Separation of the AC and DC Driving Parts for a T8 LED Tube
by: Sung Hwan Kim, et al.
Published: (2019-01-01)