Evaluation of Different Clinoptilolite Zeolites as Adsorbent for Ammonium Removal from Highly Concentrated Synthetic Wastewater

• Main Authors: Stephan Wasielewski, Eduard Rott, Ralf Minke, Heidrun Steinmetz
• Format: Article
• Language: English
• Published: MDPI AG 2018-04-01
• Series: Water
• Subjects: ammonia; ammonium recovery; Freundlich; intraparticle diffusion; isoelectric state; Langmuir; pseudo-second-order; Temkin; zeolite
• Online Access: http://www.mdpi.com/2073-4441/10/5/584

The supply of food to the growing world population requires an increasing amount of nitrogen fertilizers, which can be achieved both by the energy-intensive Haber–Bosch process and by recovering ammonium from wastewater. Within the scope of this work, it is investigated to what extent different clinoptilolites (CLIs) can be used as ion-exchangers for the removal of ammonium from highly concentrated solutions. To this end, finely ground CLIs with different grain sizes (EcoZeo 20 and CCP 20: 0–20 µm, Micro 200: 0–200 µm) were tested for their sorption properties by varying the parameters of the sorption solution (c0 = 1000 mg NH4-N/L) such as pH, temperature, or contact time. All three CLIs tested were effective at adsorbing ammonium. In a pH range from 2 to 8, all CLIs were able to eliminate ammonium equally well. Furthermore, a contact time of 60 min was sufficient to achieve 84–88% of the maximum load. At a temperature of 34 °C, the highest loading was achieved (investigated range: 10–34 °C), indicating that the adsorption process of all CLIs was exergonic and endothermic. Especially for wastewater streams with high ammonium concentrations such as sludge water from wastewater treatment plants, CLI proved to be suitable to adsorb ammonium.