Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr
The effect of the WC content and the sintering temperature, as the main technological factor, on the phase composition of TiC–xWC–5VC–18NiCr alloys was investigated by X-ray phase analysis. It was established that the main phases in the investigated alloys were the NaCl-type quaternary (Ti,V,W)C pha...
Main Authors: | S. Pukas, L. Zinko, N. German, R. Gladyshevskii, I. V. Koval, L. Bodrova, H. Kramar, S. Marynenko |
---|---|
Format: | Article |
Language: | English |
Published: |
Vasyl Stefanyk Precarpathian National University
2020-09-01
|
Series: | Фізика і хімія твердого тіла |
Subjects: | |
Online Access: | https://journals.pnu.edu.ua/index.php/pcss/article/view/3867 |
Similar Items
-
Comparative studies of WC-Co and WC-Co-Ni composites obtained by conventional powder metallurgy
by: Vinícius Martins, et al.
Published: (2011-01-01) -
Leaching Behavior of Al, Co and W from the Al-Alloying Treated WC-Co Tool as a New Recycling Process for WC Hard Scrap
by: Jaeryeong Lee, et al.
Published: (2016-07-01) -
Preparation, characterisation and testing of WC-VC-CO HP/HV of thermal spray coatings
by: Machio, Christopher Nyongesa
Published: (2006) -
The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ̊C
by: M. Mottaghi, et al.
Published: (2017-06-01) -
A simplified hardness model for WC-Co-Cubic cemented carbides
by: Pang M., et al.
Published: (2021-01-01)