Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability
Abstract Studies on stress sensitivity of relative permeability in the laboratory were mostly carried out by varying overburden pressure at constant pore pressure (PP). However, in a real oilfield situation, changes in net stress are induced by changes in PP rather than overburden pressure. This res...
Main Authors: | , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
SpringerOpen
2018-12-01
|
Series: | Journal of Petroleum Exploration and Production Technology |
Subjects: | |
Online Access: | http://link.springer.com/article/10.1007/s13202-018-0605-6 |
id |
doaj-d66f1ebc7544450d9e0352bfcc0c7b7d |
---|---|
record_format |
Article |
spelling |
doaj-d66f1ebc7544450d9e0352bfcc0c7b7d2020-11-25T02:55:10ZengSpringerOpenJournal of Petroleum Exploration and Production Technology2190-05582190-05662018-12-01932065207910.1007/s13202-018-0605-6Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeabilityCaspar Daniel Adenutsi0Zhiping Li1Fengpeng Lai2Anthony Edem Hama3Wilberforce Nkrumah Aggrey4School of Energy Resources, China University of GeosciencesSchool of Energy Resources, China University of GeosciencesSchool of Energy Resources, China University of GeosciencesCore and Rock Properties Laboratory, Department of Petroleum Engineering, Kwame Nkrumah University of Science and TechnologyCore and Rock Properties Laboratory, Department of Petroleum Engineering, Kwame Nkrumah University of Science and TechnologyAbstract Studies on stress sensitivity of relative permeability in the laboratory were mostly carried out by varying overburden pressure at constant pore pressure (PP). However, in a real oilfield situation, changes in net stress are induced by changes in PP rather than overburden pressure. This research presents the effect of PP variation at a confining stress of 25 MPa on water–oil and silica nanofluid–oil relative permeability curves. Results showed that, at low PP variations of 0.1, 2, and 5 MPa, two-phase flow parameters exhibited distinct trends. Thus, for water–oil relative permeability, initial water (S wi) and residual oil (S or) saturations both decreased as PP increased. End-point oil K ro (S wi) and water K rw (S or) relative permeabilities both increased for water flooding. Similar trends were observed for nanofluid flooding. End-point mobility ratio and displacement efficiency both increased with increase in PP within this range for water and nanofluid flooding. At 10 MPa PP, S wi decreased compared to low PP variations, while S or increased significantly. Similar observation was made for nanofluid flooding except for S or which had moderate increment. End-point mobility ratio increased significantly for water flooding, but had a slight increase for nanofluid flooding compared to low PP variations. Displacement efficiency decreased for both water and nanofluid flooding compared to low PP variations. At the same PP, water–oil and nanofluid–oil relative permeabilities showed similar S wi and K ro (S wi) but differing S or and K rw (S or). The findings provide insights into the effect PP variation on relative permeability and would be important in flooding design considerations.http://link.springer.com/article/10.1007/s13202-018-0605-6Steady-state methodRelative permeabilityStress sensitivityMobility ratioDisplacement efficiency |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Caspar Daniel Adenutsi Zhiping Li Fengpeng Lai Anthony Edem Hama Wilberforce Nkrumah Aggrey |
spellingShingle |
Caspar Daniel Adenutsi Zhiping Li Fengpeng Lai Anthony Edem Hama Wilberforce Nkrumah Aggrey Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability Journal of Petroleum Exploration and Production Technology Steady-state method Relative permeability Stress sensitivity Mobility ratio Displacement efficiency |
author_facet |
Caspar Daniel Adenutsi Zhiping Li Fengpeng Lai Anthony Edem Hama Wilberforce Nkrumah Aggrey |
author_sort |
Caspar Daniel Adenutsi |
title |
Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
title_short |
Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
title_full |
Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
title_fullStr |
Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
title_full_unstemmed |
Pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
title_sort |
pore pressure variation at constant confining stress on water–oil and silica nanofluid–oil relative permeability |
publisher |
SpringerOpen |
series |
Journal of Petroleum Exploration and Production Technology |
issn |
2190-0558 2190-0566 |
publishDate |
2018-12-01 |
description |
Abstract Studies on stress sensitivity of relative permeability in the laboratory were mostly carried out by varying overburden pressure at constant pore pressure (PP). However, in a real oilfield situation, changes in net stress are induced by changes in PP rather than overburden pressure. This research presents the effect of PP variation at a confining stress of 25 MPa on water–oil and silica nanofluid–oil relative permeability curves. Results showed that, at low PP variations of 0.1, 2, and 5 MPa, two-phase flow parameters exhibited distinct trends. Thus, for water–oil relative permeability, initial water (S wi) and residual oil (S or) saturations both decreased as PP increased. End-point oil K ro (S wi) and water K rw (S or) relative permeabilities both increased for water flooding. Similar trends were observed for nanofluid flooding. End-point mobility ratio and displacement efficiency both increased with increase in PP within this range for water and nanofluid flooding. At 10 MPa PP, S wi decreased compared to low PP variations, while S or increased significantly. Similar observation was made for nanofluid flooding except for S or which had moderate increment. End-point mobility ratio increased significantly for water flooding, but had a slight increase for nanofluid flooding compared to low PP variations. Displacement efficiency decreased for both water and nanofluid flooding compared to low PP variations. At the same PP, water–oil and nanofluid–oil relative permeabilities showed similar S wi and K ro (S wi) but differing S or and K rw (S or). The findings provide insights into the effect PP variation on relative permeability and would be important in flooding design considerations. |
topic |
Steady-state method Relative permeability Stress sensitivity Mobility ratio Displacement efficiency |
url |
http://link.springer.com/article/10.1007/s13202-018-0605-6 |
work_keys_str_mv |
AT caspardanieladenutsi porepressurevariationatconstantconfiningstressonwateroilandsilicananofluidoilrelativepermeability AT zhipingli porepressurevariationatconstantconfiningstressonwateroilandsilicananofluidoilrelativepermeability AT fengpenglai porepressurevariationatconstantconfiningstressonwateroilandsilicananofluidoilrelativepermeability AT anthonyedemhama porepressurevariationatconstantconfiningstressonwateroilandsilicananofluidoilrelativepermeability AT wilberforcenkrumahaggrey porepressurevariationatconstantconfiningstressonwateroilandsilicananofluidoilrelativepermeability |
_version_ |
1724717895084146688 |