Double twist torsion testing to determine the non recrystallization temperature
Abstract A double-twist torsion testing technique has been developed using a 316 stainless steel as an exemplar material to experimentally assess recrystallization behavior and determine the non-recrystallization temperature (Tnr). This new method was compared to the traditional methods of double-hi...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Publishing Group
2021-01-01
|
| Series: | Scientific Reports |
| Online Access: | https://doi.org/10.1038/s41598-021-81139-1 |
| Summary: | Abstract A double-twist torsion testing technique has been developed using a 316 stainless steel as an exemplar material to experimentally assess recrystallization behavior and determine the non-recrystallization temperature (Tnr). This new method was compared to the traditional methods of double-hit compression and multi-step hot torsion testing. The double-twist torsion test allows Tnr to be related to the extent of austenite recrystallization through measurements of fractional softening while accommodating multiple deformation and recrystallization steps with a single specimen. The double-twist torsion test resulted in average Tnr values similar to those determined with multi-step hot torsion, and a partially recrystallized microstructure was observed in the vicinity of the calculated Tnr for all three methods. The ability of the double-twist torsion test to relate the experimental Tnr to the evolution of austenite recrystallization via fractional softening measurements while incorporating effects of multiple deformation steps offers an advantage over traditional methods for quantifying changes in austenite recrystallization during thermomechanical processing. |
|---|---|
| ISSN: | 2045-2322 |