Investigation of the influence of gear milling modes of cylindrical gears on the quality parameters of tooth surfaces

• Main Authors: Kane Mark, Sheleg Valery, Kravchuk Marina, Kot Pavel
• Format: Article
• Language: English
• Published: EDP Sciences 2020-01-01
• Series: MATEC Web of Conferences
• Online Access: https://www.matec-conferences.org/articles/matecconf/pdf/2020/13/matecconf_pt2020_05002.pdf

Summary. The current state of the problem of studying the influence of gear milling modes of cylindrical gears on the quality parameters of the tooth surfaces is considered. Insufficient study of this problem and inconsistency of the available results is shown. The relevance and possible areas of application of this research are shown. The research objects are described (the effect of the cutting speed V and feed S during hobbing of cylindrical gears on the roughness parameter Ra, microhardness Hμ, residual stresses 1 and 2, σ1 and σ2 in the tooth surfaces), the accepted methods of planning experiments and presenting results. The results obtained are presented. It is established that the considered relationships can be modeled with sufficient accuracy by statistical methods and can be described by polynomials of the first or second degree. Shows the nature of the change Ra, Hμ, σ1 and σ2, with changes of V and S. Given are calculated according to Ra, Hμ, σ1 and σ2 from V and S.