Improved Mechanical Properties of SiC Fibers Pyrolyzed from Polycarbosilane under Tension

Improved Mechanical Properties of SiC Fibers Pyrolyzed from Polycarbosilane under Tension

Bibliographic Details
Main Authors:	Chu, Zeng-Yong, Feng, Chun-Xiang, Song, Yong-Cai, Wang, Jun, Wang, Ying-De, Li, Xiao-Dong
Format:	Article
Language:	English
Published:	De Gruyter 2002-04-01
Series:	Science and Engineering of Composite Materials
Online Access:	https://doi.org/10.1515/SECM.2002.10.2.131

Similar Items

Chemical and Behavioral Study of Commercial Polycarbosilanes for the Processing of SiC Fibers
by: Potticary, Santeri A.
Published: (2017)

Melt Spun of Continuous Polycarbosilane Fibers
by: Wang, Yingde, et al.
Published: (2000-09-01)

Synthesis Of SiC/Cu Composite Powders From Polycarbosilane And Cupric Nitrate Trihydrate
by: Bang S.-R., et al.
Published: (2015-06-01)

Fabrication of porous SiC(y) (core)/C (shell) fibres using a hybrid precursor of polycarbosilane and pitch
by: Chu, Zengyong, et al.
Published: (2010)

Synthesis and characterization of polycarbosilane
by: Sillick, Matthew P.
Published: (2008)

Enhanced flame retardancy of polyethylene/magnesium hydroxide with polycarbosilane
by: Chunfeng Wang, et al.
Published: (2018-09-01)

Polycarbosilane-derived Si-C nanotubes with graphite-like structure by nanotemplate method
by: Yan-Hsiao-Mei, et al.
Published: (2003)

Effect of heating rate on the properties of silicon carbide fiber with chemical-vapor-cured polycarbosilane fiber
by: Tae-Eon Kim, et al.
Published: (2017-03-01)

A Flexible <i>a</i>-SiC-Based Neural Interface Utilizing Pyrolyzed-Photoresist Film (C) Active Sites
by: Chenyin Feng, et al.
Published: (2021-07-01)

Hybrid Polycarbosilane-Siloxane Dendrimers: Synthesis and Properties
by: Sergey A. Milenin, et al.
Published: (2021-02-01)

Tension-compression Fatigue Behavior and Failure Mechanism of Needled C/SiC Composite
by: FANG Guang-wu, et al.
Published: (2016-11-01)

Synergistic effect of the mesoporosity-turbostratic carbon on the six-fold piezoresistivity improvement of pristine polymer derived SiC pyrolyzed at high temperature
by: Md Atiqur Rahman Chowdhury, et al.
Published: (2021-06-01)

Preparation and field emission properties of carbon nanotubes from Polycarbosilane
by: 許肇根
Published: (2001)

Numerical Simulation of C/SiC Plain Weave Composites with Defects under Unidirectional Tension
by: ZENG Xianglong, et al.
Published: (2017-08-01)

Comparisons of Damage Evolution between 2D C/SiC and SiC/SiC Ceramic-Matrix Composites under Tension-Tension Cyclic Fatigue Loading at Room and Elevated Temperatures
by: Longbiao Li
Published: (2016-10-01)

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers
by: Enze Jin, et al.
Published: (2020-01-01)

Synthesis and Properties of Ferroelectric Side-Chain Liquid Crystalline Polycarbosilanes and Dimeric Liquid Crystalline Compunds
by: Hsin-Heh Wang, et al.
Published: (1999)

Effect of Acetone Content on the Preparation Period and Curing/Pyrolysis Behavior of Liquid Polycarbosilane
by: Yizhi Liu, et al.
Published: (2020-10-01)

Mechanical properties of SiC whiskers reinforced SiC<sub>f</sub>/SiC composites
by: JIANG Zhuo-yu, et al.
Published: (2021-08-01)

Microstructure and mechanical property of SiC fiber, SiC/SiC composite and environmental barrier coating exposed in air at high temperatures
by: Morishita, Kohei
Published: (2011)

Research Progress on Continuous SiC Fiber Reinforced Metal Matrix Composite
by: LI Pei-huan, et al.
Published: (2016-08-01)

Preparation of Al2O3 Fibers, SiC Fibers and Al2O3/SiC Composite Fibers from Carbon Fibers
by: Shin-Yi Shen, et al.
Published: (2007)

Oxidation behavior of SiC/SiC composites in air at high temperature
by: HONG Zhi-liang, et al.
Published: (2021-05-01)

CFD Study on Fluidized Bed Pyrolyzers
by: K.-L. Lam, et al.
Published: (2012-09-01)

Properties of Malaysia Bamboo’s (Gigantochloa Scortechinii) Pyrolyzed Products via Drop Type Pyrolyzer Reactor: Bio-Oil
by: N.B. Osman, et al.
Published: (2014-06-01)

Risk Evaluation of Pyrolyzed Biochar from Multiple Wastes
by: Shem M. Ndirangu, et al.
Published: (2019-01-01)

Effect of Interface Coating on High Temperature Mechanical Properties of SiC–SiC Composite Using Domestic Hi–Nicalon Type SiC Fibers
by: Enze Jin, et al.
Published: (2020-05-01)

Temperature-dependent proportional limit stress of SiC/SiC fiber-reinforced ceramic-matrix composites
by: Li Longbiao
Published: (2020-06-01)

Effects of Surface Treatment Processes of SiC Ceramic on Interfacial Bonding Property of SiC-AFRP
by: WEI Ru-bin, et al.
Published: (2016-12-01)

Mesporous 3C-SiC Hollow Fibers
by: Yangwen Liu, et al.
Published: (2017-05-01)

Développement de matrice Si-C-(B,N) de composites à renfort fibreux par modification chimique de polycarbosilanes/polysilazanes
by: Schmidt, Marion
Published: (2017)

The Correlation of Pore Size and Bioactivity of Spray-Pyrolyzed Mesoporous Bioactive Glasses
by: Yu-Jen Chou, et al.
Published: (2017-05-01)

UV-Cured Coatings Prepared with Sulfhydryl-Terminated Branched Polyurethane and Allyl-Terminated Hyperbranched Polycarbosilane
by: Xiaojiao Jiao, et al.
Published: (2020-04-01)

Oxidation Behavior of Tyranno ZMI-SiC Fiber/SiC-SiBC Matrix Composite from 800 to 1200 °C
by: Donglin Zhao, et al.
Published: (2018-08-01)

Modeling of a wood pyrolyzing tubular reactor
by: Hatton, Robert Neal
Published: (2006)

The feasibility of making pyrolyzed chars from compost
by: CHUANG,MING-AN, et al.
Published: (2008)

Use of Pyrolyzed Soybean Hulls as Fillers in Polyolefins
by: Coben, Collin
Published: (2020)

Thermal conductivity/diffusivity of SiC-Mullite and SiC-SiC composites
by: Russell, Laura M.
Published: (2014)

Effect of Ti and Si Interlayer Materials on the Joining of SiC Ceramics
by: Yang-Il Jung, et al.
Published: (2016-08-01)

Effects of T6 Treatment, Tensile Temperature, and Mass Fraction of SiC on the Mechanical Properties of SiC<sub>p</sub>/6061Al Composites
by: Yong Hu, et al.
Published: (2019-05-01)