Microstructure and Texture Evolution in Primary Recrystallization of CGO Silicon Steel

• Main Authors: SUN Qiang, LI Zhi-chao, MI Zhen-li, DANG Ning
• Format: Article
• Language: zho
• Published: Journal of Materials Engineering 2016-09-01
• Series: Journal of Materials Engineering
• Subjects: CGO steel; primary recrystallization; texture; microstructure
• Online Access: http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.09.006
• ISSN: 1001-4381; 1001-4381

Primary recrystallization annealing was operated in 3%(mass fraction)Si CGO steels. Different annealing holding time was set up in experiments. Microstructure, dislocations and texture distribution were analysed by OM, TEM and EBSD techniques. Evolution of microstructure and texture in primary recrystallization was studied. Results indicate that as the annealing holding time prolongs, recovery and recrystallization occur gradually. When the holding time increases to 300s, recrystallization is almost fully realized and grains are equiaxed. With the extension of holding time, the dislocation density decreases. Primary recrystallization texture is affected by holding time. As the holding time extends, {111}<112> texture and {110}<112> texture are weakened and Goss texture is strengthened. {111}<110> texture is reduced firstly and then increases. The intensity of cube texture and rotated cube texture is stable. When holding time is short, grains are dominated by small angle grain boundaries with the existence of a large amount of subgrains. As the holding time prolongs, large angle grain boundaries increase.