ADMM-based distributed state estimation for integrated energy system
In order to have an accurate knowledge of system-wide operation states, it is necessary to perform state estimation for the integrated energy system (IES) as the basis of energy management and control. Centralized state estimation is practically infeasible for IES due to the unreliability of communi...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
China electric power research institute
2019-06-01
|
| Series: | CSEE Journal of Power and Energy Systems |
| Online Access: | https://ieeexplore.ieee.org/document/8735425 |
| Summary: | In order to have an accurate knowledge of system-wide operation states, it is necessary to perform state estimation for the integrated energy system (IES) as the basis of energy management and control. Centralized state estimation is practically infeasible for IES due to the unreliability of communication, the barrier on privacy, and the large scale of integrated systems. This paper proposes a distributed state estimation algorithm based on the alternating direction method of multipliers (ADMM) for IES containing electricity, heat, and natural gas. Various coupling units are taken into full consideration in modeling of IES state estimation to reflect the harmonization of multi energy. On the basis of bilinear measurement model, the state estimation considering nonlinear measurements can be replaced by an equivalent three-stage problem containing two linear state estimations and an intermediate transformation to avoid non-convex optimization. The three-stage procedure for IES state estimation can be further decoupled over three sub-systems with coordination on coupling units, yielding a fully distributed scheme based on ADMM. A modified ADMM with the self-adjusting penalty parameter is also adopted to enhance the convergence. Simulation results demonstrate the validity and superiority of the proposed algorithm. |
|---|---|
| ISSN: | 2096-0042 2096-0042 |