Comparative deformability of compressive members reinforced with steel and GFRP reinforcement
The paper contains the results of testing of compressive members reinforced longitudinally and transversally with steel and GFRP reinforcement. The spacing of transverse reinforcement (stirrups) and longitudinal reinforcement ratio varied in the specimens. The stress-strain, stress-Poisson’s ration,...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2018-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | https://doi.org/10.1051/matecconf/201825102036 |
| Summary: | The paper contains the results of testing of compressive members reinforced longitudinally and transversally with steel and GFRP reinforcement. The spacing of transverse reinforcement (stirrups) and longitudinal reinforcement ratio varied in the specimens. The stress-strain, stress-Poisson’s ration, stress-volumetric strain relationships for tested specimens are given. It was observed that the appearance of cracks occurred with loading 90% of total. By the results of testing investigated that with the decreasing of spacing of transverse reinforcement the strength of specimens increased. Conclusion is made that by using small spacing of transverse reinforcement transverse strains and Poisson’s ratio decreasing, while modulus of elasticity increasing. |
|---|---|
| ISSN: | 2261-236X |