Binderless MDF from Hydroxymethylated Kenaf Pulp

• Main Authors: Nyoman J Wistara, Wulan Starini, Fauzi Febrianto, Gustan Pari
• Format: Article
• Language: English
• Published: Universitas Gadjah Mada 2018-01-01
• Series: Jurnal Ilmu Kehutanan
• Subjects: chemical modification; Hibiscus cannabinus L.; hydroxymethylation; lignin; MDF
• Online Access: https://jurnal.ugm.ac.id/jikfkt/article/view/34031/20362
• ISSN: 0126-4451; 2477-3751

Modified lignin with improved reactivity can be a potential alternative for synthetic phenol formaldehyde resin for the adhesive of wood composite. Direct hydroxymethylation of kenaf in the present experiments was intended to increase lignin reactivity, and therefore was expected to result in satisfying properties of binderless MDF. The stem of kenaf was refined in a disk refiner and the refined fibers were hydroxymethylated in various levels of alkalinity. The concentration of NaOH during hydroxymethylation was of 3%, 6% and 12%. Wet process was applied to produce MDF (30 cm x 30 cm x 1 cm) with target density of 0.65 g/cm³. Physical and mechanical properties of MDF were measured in accordance with the standard procedure of JIS A 5905: 2003. Chemical changes in the surface of pulp and the change of board crystallinity were evaluated by FTIR-KBr method and X-Ray Diffractometry (XRD), respectively. Density, moisture content, and screw withdrawal of the board increased with increasing of NaOH concentration. Thickness swelling, water absorption, MOE and MOR increased up to 3% concentration of NaOH. The IB and heat conductivity of MDF were not influenced by NaOH concentration. Increasing OH groups due to hydroxymethylation was thought to be the origin of high water absorption and thickness swelling of the resulting boards. Higher alkalinity during hydroxymethylation stage was likely increasing cellulose crystallinity that brought about increasing board density. However, chemical modification of the fiber was thought to be more influential to the bending strength and stiffness of the resulting fiberboard. Hydroxymethylation of kenaf pulp was successfully improved board properties. Except for the moisture content, thickness swelling and internal bonding (at 0% and 3% NaOH concentration), all properties of the MDF satisfied the requirement of JIS A 5905: 2003 (type 5) standard.