Improving thermal performance using Al2O3-water nanofluid in a double pipe heat exchanger filling with porous medium
A double pipe heat exchanger is significant device for many industrial applications. In this paper, an experimental study using both porous media and nanofluid to enhance heat transfer in a double pipe heat exchanger is performed. The test rig has been fabricated with inner copper pipe of 1.10 m len...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
VINCA Institute of Nuclear Sciences
2020-01-01
|
| Series: | Thermal Science |
| Subjects: | |
| Online Access: | http://www.doiserbia.nb.rs/img/doi/0354-9836/2020/0354-98362000056J.pdf |
| Summary: | A double pipe heat exchanger is significant device for many industrial applications. In this paper, an experimental study using both porous media and nanofluid to enhance heat transfer in a double pipe heat exchanger is performed. The test rig has been fabricated with inner copper pipe of 1.10 m length, 16 mm, and 14 mm outside and inside diameter, respectively. While, the outer PVC pipe is 1 m length, 31 mm, and 27 mm outside and inside diameter, respectively. The inner pipe has been filling with 3 mm diameters of steel balls porous media. The experimental tests were performed utilizing alumina nanofluid (Al2O3-water) with two volume concentrations 0.5% and 1%. The volume flow-rates are in the range of (2-5) Lpm and 10 Lpm through inner and outer pipe, respectively. It was conducted with a constant 28ᵒC inlet temperature of cold fluid-flow inside the inner pipe and 50ᵒC inlet temperature of hot fluid-flow inside the outer pipe. Results indicated that the heat transfer enhanced as nanofluid volume concentrations and volume flow-rates increase. It was observed that effectiveness increases as increase of flow-rate and nanofluid concentrations. |
|---|---|
| ISSN: | 0354-9836 2334-7163 |