| Summary: | It is inevitable for data collection that IoT sensors are distributed to interested areas. However, not only the proper placement of sensors, but also the replacement of sensors that have run out of energy is very difficult. As a remedy, wireless charging systems for IoT sensors have been researched recently, but it is apparent that the availability of charging system is limited especially for IoT sensors scattered in rugged terrain. Thus, it is important that the sensor relocation models to recover sensing holes employ energy-efficient scheme. While there are various methods in the mobile model of wireless sensors, well-known wheel-based movements in rough areas are hard to achieve. Thus, research is ongoing in various areas of the hopping mobile model in which wireless sensors jump. Many past studies about hopping sensor relocation assume that all sensor nodes are aware of entire network information throughout the network. These assumptions do not fit well to the actual environment, and they are nothing but classical theoretical research. In addition, the physical environment (sand, mud, etc.) of the area in which the sensor is deployed can change from time to time. In this paper, we overcome the theoretical-based problems of the past researches and propose a new realistic hopping sensor relocation protocol considering terrain conditions. Since the status of obstacles around the sensing hole is unknown, the success rate of the hopping sensor relocation is used to predict the condition of the surrounding environment. Also, we are confident that our team is uniquely implementing OMNeT++ (Objective Modular Network Testbed in C++) simulation in the hopping sensor relocation protocol to reflect the actual communication environment. Simulations have been performed on various obstacles for performance evaluation and analysis, and we are confident that better energy efficiency with later appearance of sensing holes can be achieved compared to well-known relocation protocols.
|
|---|
