| Summary: | Anaerobic bioelectrochemical digestion (ABD) is widely used for treating wastewater and recovering energy. The electrode is the key point for ABD system, which was sparsely studied with food waste. In this study, a carbon-modified copper foam was fabricated with copper foam and multiple wall carbon nanotubes (MWCNT) through electrophoretic deposition and screen-printing methods. The carbon-modified copper foam electrode was investigated in an ABD reactor for food waste. The features of bioelectrochemical methane production, process stability, and electrochemical characterization were evaluated in the ABD reactor, and were compared to the control reactor without equipping electrode. The ultimate methane production reached 338.1 mL CH<sub>4</sub>/L in the ABD reactor, which was significantly higher than the 181.0 mL CH<sub>4</sub>/L of the control reactor. The methane produced from the electrode was 137.8 mL CH<sub>4</sub>/L, which was up to 40.8% of total methane production in the ABD reactor. It was attributed to the electroactive bacteria that were enriched and activated by the carbon-modified copper foam electrode, further activating the direct interspecies electron transfer (DIET) pathways for methane production. The cyclic voltammetry (CV) analysis showed higher redox peaks, which is one of the pieces of evidence for the enrichment of electroactive bacteria. The carbon-modified copper foam electrode has the advantages of both carbon and metal materials, and demonstrated a high possibility for use in bioelectrochemical methane production for food waste.
|
|---|
