The Possibility of Using Slag for the Production of Geopolymer Materials and Its Influence on Mechanical Performances—A Review

The Possibility of Using Slag for the Production of Geopolymer Materials and Its Influence on Mechanical Performances—A Review

All industries produce wastes or byproducts, and if those are not properly managed, they will cause adverse effects on the environment. As the need for steel increases globally, waste from steel processing will also increase. Hazardous waste from steel processing is produced in the form of a coarse,...

Full description

Bibliographic Details
Main Authors:	Brăduț Alexandru Ionescu, Adrian-Victor Lăzărescu, Andreea Hegyi
Format:	Article
Language:	English
Published:	MDPI AG 2020-12-01
Series:	Proceedings
Subjects:	geopolymer binders industrial byproducts sustainable development
Online Access:	https://www.mdpi.com/2504-3900/63/1/30

Similar Items

Influence of the heat treatment procedure on the geopolymer materials properties – a review
by: Brăduț Alexandru IONESCU, et al.
Published: (2020-11-01)

Investigating the Possibility of Geopolymer to Produce Inorganic-Bonded Wood Composites for Multifunctional Construction Material – A Review
by: Siti Noorbaini Sarmin, et al.
Published: (2014-09-01)

Parametric Studies Regarding the Development of Alkali-Activated Fly Ash-Based Geopolymer Concrete Using Romanian Local Raw Materials
by: Adrian-Victor Lăzărescu, et al.
Published: (2020-12-01)

Utilization of Industrial By-Products/Waste to Manufacture Geopolymer Cement/Concrete
by: Numanuddin M. Azad, et al.
Published: (2021-01-01)

Green Geopolymer with Incorporated PCM for Energy Saving in Buildings
by: Shadnia, Rasoul, et al.
Published: (2016)

Recycling of Clay Sediments for Geopolymer Binder Production. A New Perspective for Reservoir Management in the Framework of Italian Legislation: The Occhito Reservoir Case Study
by: Bruno Molino, et al.
Published: (2014-07-01)

Alkali-activated binders/geopolymer and an application to environmental engineering
by: Nida Chaimoon, et al.
Published: (2014-06-01)

Reuse of iron ore tailings in the production of geopolymer mortars
by: Paulo Henrique Ribeiro Borges, et al.

Geopolymer Composite Coatings Based on Moroccan Clay and Sands for Restoration Application
by: Anass El Khomsi, et al.
Published: (2021-05-01)

STUDY OF FLY ASH GEOPOLYMER AND FLY ASH/SLAG GEOPOLYMER IN TERM OF PHYSICAL AND MECHANICAL PROPERTIES
by: Ng HUI-TENG, et al.
Published: (2020-12-01)

Flyash Based Geopolymer Concrete – A State of the Art Review
by: G. Saravanan, et al.
Published: (2013-01-01)

VARIABLE FACTORS CONTROLLING AMORPHOUS-ZEOLITE PHASE TRANSFORMATION IN METAKAOLIN BASED GEOPOLYMER
by: Kannikar Juengsuwattananon, et al.
Published: (2017-12-01)

Experimental research on the development of geopolymer materials using Romanian local materials
by: Adrian LĂZĂRESCU, et al.
Published: (2018-12-01)

The Binder Index – A Parameter That Influences the Strength of Geopolymer Concrete
by: Rama Seshu D., et al.
Published: (2019-03-01)

Harmfulness Assessment of Moulding Sands with a Geopolymer Binder and a New Hardener, in An Aspect of the Emission of Substances from the Btex Group
by: Bobrowski A., et al.
Published: (2015-04-01)

DEVELOPMENT OF COMPOSITE ELECTRODES CONTAINING GEOPOLYMER BINDER FOR ELECTROCHEMICAL APPLICATIONS
by: SAWITTA TRIAMTHAISONG, et al.
Published: (2018-10-01)

The effect of 60Co gamma irradiation on coal fly-ash geopolymer paste setting time
by: Rubinjoni Luka Z., et al.
Published: (2020-01-01)

Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features
by: Ali Shalbafan, et al.
Published: (2020-01-01)

Research on strength properties of geopolymer based on tungsten mine waste and recycled ground glass
by: Szymon Dawczyński, et al.
Published: (2019-01-01)

An Experimental Investigation into the Factors Affecting Strength and Flowability of Geopolymer Binder
by: Ahmed Salah Jamal, et al.
Published: (2019-08-01)

Rheology and Mechanical Properties of Fly Ash-Based Geopolymer Mortars with Ground Granulated Blast Furnace Slag Addition
by: Mateusz Sitarz, et al.
Published: (2020-05-01)

Development and Optimization of Geopolymers Made with Desert Dune Sand and Blast Furnace Slag
by: Alsallamin, A., et al.
Published: (2022)

FFECT OF POZOOLANIC MATERIALS ON COMPRESSIVE STRENGTH OF GEOPOLYMER CONCRETE
by: Mohammed H. Shamsa, et al.
Published: (2018-09-01)

Synthesis and Characterization of Geopolymers as Construction Materials
by: Acharya, Indra Prasad
Published: (2018)

THE INFLUENCE OF PHOSPHORUS SLAG ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF METAKAOLIN-BASED GEOPOLYMER PASTES
by: M. A. SOLEIMANI, et al.
Published: (2013-03-01)

Revealing the Influence of Microparticles on Geopolymers’ Synthesis and Porosity
by: Dumitru Doru Burduhos Nergis, et al.
Published: (2020-07-01)

Resistance of Alkali Activated Water-Cooled Slag Geopolymer to Sulphate Attack
by: S. A. Hasanein, et al.
Published: (2011-06-01)

The possibility of using waste materials as raw materials for the production of geopolymers
by: Beata Figiela, et al.
Published: (2020-09-01)

Activation of slag through a combination of NaOH/NaS alkali for transforming it into geopolymer slag binder mortar – assessment the effects of two different Blaine fines and three different curing conditions
by: Hasan Biricik, et al.
Published: (2021-09-01)

A Comprehensive Study on the Factors Affecting the Workability and Mechanical Properties of Ambient Cured Fly Ash and Slag Based Geopolymer Concrete
by: Rana Muhammad Waqas, et al.
Published: (2021-09-01)

Characterization of Slag Reprocessing Tailings-Based Geopolymers in Marine Environment
by: Jie Wu, et al.
Published: (2020-09-01)

Evolution of Mechanical Properties with Time of Fly-Ash-Based Geopolymer Mortars under the Effect of Granulated Ground Blast Furnace Slag Addition
by: Mateusz Sitarz, et al.
Published: (2020-03-01)

Management and valorisation of delithiated β-spodumene and its processing stream
by: A. Karrech, et al.
Published: (2021-12-01)

THERMO-MECHANICAL PROPERTIES OF AN ANTI BACTERIA COATING MATERIAL BASED ON A HYBRID COMPOSITE GEOPOLYMER-CHITOSAN
by: . Subaer, et al.
Published: (2019-04-01)

Peat modification integrating Geopolymer and fly ash
by: Abdullah M.H, et al.
Published: (2019)

Geopolymer materials based on natural zeolite
by: Aleksandar Nikolov, et al.
Published: (2017-06-01)

THE INFLUENCE OF PROCESS CONDITIONS ON GROUND COAL SLAG AND BLAST FURNACE SLAG BASED GEOPOLYMER PROPERTIES
by: Quyen V. Trinh, et al.
Published: (2020-01-01)

Influence of Liquid-to-Solid and Alkaline Activator (Sodium Silicate to Sodium Hydroxide) Ratios on Fresh and Hardened Properties of Alkali-Activated Palm Oil Fuel Ash Geopolymer
by: Shi Ying Kwek, et al.
Published: (2021-07-01)

Relationship between Moisture Transportation, Efflorescence and Structure Degradation in Fly Ash/Slag Geopolymer
by: Shuaikang Zhou, et al.
Published: (2020-12-01)

Fire Resistance Behaviour of Geopolymer Concrete:An Overview
by: Salmabanu Luhar, et al.
Published: (2021-02-01)