Effective Surface Nano-Crystallization of Ni<sub>2</sub>FeCoMo<sub>0.5</sub>V<sub>0.2</sub> Medium Entropy Alloy by Rotationally Accelerated Shot Peening (RASP)

Effective Surface Nano-Crystallization of Ni<sub>2</sub>FeCoMo<sub>0.5</sub>V<sub>0.2</sub> Medium Entropy Alloy by Rotationally Accelerated Shot Peening (RASP)

The surface nano-crystallization of Ni<sub>2</sub>FeCoMo<sub>0.5</sub>V<sub>0.2</sub> medium-entropy alloy was realized by rotationally accelerated shot peening (RASP). The average grain size at the surface layer is ~37 nm, and the nano-grained layer is as thin as...

Full description

Bibliographic Details
Main Authors:	Ningning Liang, Xiang Wang, Yang Cao, Yusheng Li, Yuntian Zhu, Yonghao Zhao
Format:	Article
Language:	English
Published:	MDPI AG 2020-09-01
Series:	Entropy
Subjects:	medium entropy alloy deformation twinning dislocation slip surface nano-crystallization shot peening
Online Access:	https://www.mdpi.com/1099-4300/22/10/1074

Similar Items

The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
by: Stanisław Bławucki, et al.
Published: (2017-12-01)

The Influence of Hardness and Retained Austenite on the Fatigue Limit after Shot Peening
by: Björklund, Erik
Published: (2014)

Residual stress relaxation and re-shot-peening process of wet shot-peened titanium alloy during tensile fatigue load
by: ZHAO Hui-sheng, et al.
Published: (2020-05-01)

Analysis of the Impact of Double Shot Peening on the Value of Roughness Parameter and Distribution of Stresses in the RSA 501 Alloy (Al Mg5 Mn1 Sc0.8 Zr0.4)
by: Paulina Byczkowska, et al.
Published: (2017-09-01)

Comparison between Shot Peening, Cavitation Peening, and Laser Peening by Observation of Crack Initiation and Crack Growth in Stainless Steel
by: Hitoshi Soyama
Published: (2019-12-01)

Shot peening como ferramenta para melhoria de desempenho de componentes automotivos forjados
by: Antoni, Gustavo de Oliveira de
Published: (2018)

Shot peening como ferramenta para melhoria de desempenho de componentes automotivos forjados
by: Antoni, Gustavo de Oliveira de
Published: (2018)

Shot peening como ferramenta para melhoria de desempenho de componentes automotivos forjados
by: Antoni, Gustavo de Oliveira de
Published: (2018)

Polysubstituted High-Entropy [LaNd](Cr<sub>0.2</sub>Mn<sub>0.2</sub>Fe<sub>0.2</sub>Co<sub>0.2</sub>Ni<sub>0.2</sub>)O<sub>3</sub> Perovskites: Correlation of the Electrical and Magnetic Properties
by: Vladimir E. Zhivulin, et al.
Published: (2021-04-01)

A dynamic finite element simulation of the shot-peening process
by: Zion, H. Lewis
Published: (2007)

Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening
by: Abdullahi K. Gujba, et al.
Published: (2014-12-01)

The Effects of Shot Peening parameters on the subsurface properties of AA7075 T6 aluminum alloy
by: Egemen AVCU
Published: (2018-12-01)

Development by Mechanochemistry of La<sub>0.8</sub>Sr<sub>0.2</sub>Ga<sub>0.8</sub>Mg<sub>0.2</sub>O<sub>2.8</sub> Electrolyte for SOFCs
by: Francisco J. Garcia-Garcia, et al.
Published: (2020-03-01)

Formulation of a Generalized Unit Cell and its Application to Shot Peening Simulation
by: Christoph H. Richter, et al.
Published: (2020-12-01)

The Immersion Corrosion Resistance of Shot Peening and MAO Applied on AZ31−0.5% La Sheets
by: G. Elmansouri, et al.
Published: (2020-02-01)

Effect of shot peening intensity and surface coverage on room-temperature fatigue property of TC4 titanium alloy
by: WANG Xin, et al.
Published: (2020-09-01)

Reduction Rate of Remanent Stress in Thermal Spraying Depositions by Shot Peening
by: Leonard TEODORU, et al.
Published: (2007-05-01)

Estudio de las condiciones de procesamiento de Bi<sub>0.5</sub>(Na<sub>0.8</sub>K<sub>0.2</sub>)<sub>0.5</sub>TiO<sub>3</sub>
by: Camargo, J., et al.
Published: (2014-02-01)

Distribution of Relaxation Times and Equivalent Circuits Analysis of Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3−δ</sub>
by: Davide Clematis, et al.
Published: (2019-05-01)

Influence of Shot Peening on Abrasion Wear in Real Conditions of Ni-Cu-Ausferritic Ductile Iron
by: Wieczorek A. N.
Published: (2016-12-01)

Evaluation of shot peening on the fatigue strength of anodized Ti-6Al-4V alloy
by: Costa Midori Yoshikawa Pitanga, et al.
Published: (2006-01-01)

Chemical Degradation of the La<sub>0.6</sub>Sr<sub>0.4</sub>Co<sub>0.2</sub>Fe<sub>0.8</sub>O<sub>3−δ</sub>/Ce<sub>0.8</sub>Sm<sub>0.2</sub>O<sub>2−δ</sub> Interface during Sintering and Cell Operation
by: Mélanie François, et al.
Published: (2021-06-01)

The Ultrafast Laser Ablation of Li(Ni<sub>0.6</sub>Mn<sub>0.2</sub>Co<sub>0.2</sub>)O<sub>2</sub> Electrodes with High Mass Loading
by: Penghui Zhu, et al.
Published: (2019-09-01)

Evaluation of the Effect of Minor Additions in the Crystallization Path of [(Fe<sub>0.5</sub>Co<sub>0.5</sub>)<sub>0.75</sub>B<sub>0.2</sub>Si<sub>0.05</sub>]<sub>100-x</sub>M<sub>x</sub> Metallic Glasses by Means of Mössbauer Spectroscopy
by: S. Leila Panahi, et al.
Published: (2021-08-01)

Influence of the Perovskite La<sub>0.8</sub>Sr<sub>0.2</sub>Mn<sub>0.5</sub>Co<sub>0.5</sub>O<sub>3-δ</sub> on the Electrochemical Performance of the Graphene-Based Supercapacitor
by: Bo-Min Kim, et al.
Published: (2020-06-01)

A FEM-Based 2D Model for Simulation and Qualitative Assessment of Shot-Peening Processes
by: Georgios Maliaris, et al.
Published: (2021-05-01)

Functional Sr<sub>0.5</sub>Ba<sub>0.5</sub>Sm<sub>0.02</sub>Fe<sub>11.98</sub>O<sub>4</sub>/<i>x</i>(Ni<sub>0.8</sub>Zn<sub>0.2</sub>Fe<sub>2</sub>O<sub>4</sub>) Hard–Soft Ferrite Nanocomposites: Structure, Magnetic and Microwave Properties
by: Norah A. Algarou, et al.
Published: (2020-10-01)

Infiltrated Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3-d</sub>-Based Electrodes as Anodes in Solid Oxide Electrolysis Cells
by: Xavier Majnoni d’Intignano, et al.
Published: (2020-07-01)

Electrochemical Properties of LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode Materials Prepared with Different Ammonia Content
by: Chen Xu, et al.
Published: (2021-08-01)

THE EFFECT OF THE CONDITIONS OF SHOT PEENING THE INCONEL 718 NICKEL ALLOY ON THE GEOMETRICAL STRUCTURE OF THE SURFACE
by: Kazimierz Zaleski, et al.
Published: (2017-06-01)

Heat Transfer Enhancement by Shot Peening of Stainless Steel
by: Pramote Koowattanasuchat, et al.
Published: (2020-06-01)

Enhanced Structural Stability and Electrochemical Performance of LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode Materials by Ga Doping
by: Zhibei Liu, et al.
Published: (2021-04-01)

Improved Capacity Retention of SiO<sub>2</sub>-Coated LiNi<sub>0.6</sub>Mn<sub>0.2</sub>Co<sub>0.2</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries
by: Xiaoxue Lu, et al.
Published: (2019-09-01)

A Zn-Doped Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3-δ</sub> Perovskite Cathode with Enhanced ORR Catalytic Activity for SOFCs
by: Qiannan Zeng, et al.
Published: (2020-02-01)

Clarifying the Role of the Reducers-to-Oxidizers Ratio in the Solution Combustion Synthesis of Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3-δ</sub> Oxygen Electrocatalysts
by: Francesca Deganello, et al.
Published: (2020-12-01)

Fabrication and electrochemical performance of Li[Li<sub>0.2</sub>Ni<sub>0.2</sub>Mn<sub>0.6</sub>]O<sub>2</sub> coated with Li<sub>2</sub>ZrO<sub>3</sub> as cathode material for lithium-ion batteries
by: LIN Jia-ming, et al.
Published: (2019-03-01)

Fabrication and electrochemical performance of Li[Li<sub>0.2</sub>Ni<sub>0.2</sub>Mn<sub>0.6</sub>]O<sub>2</sub> coated with Li<sub>2</sub>ZrO<sub>3</sub> as cathode material for lithium-ion batteries
by: LIN Jia-ming, et al.
Published: (2020-03-01)

EVALUATION OF THE EFFECTIVENESS OF THE SHOT PEENING PROCESS FOR THIN-WALLED PARTS BASED ON THE DIAMETER OF IMPRESSIONS PRODUCED BY THE IMPACT OF SHOT MEDIA
by: Kazimierz Zaleski, et al.
Published: (2015-05-01)

Microstructure and Hydrogen Storage Properties of the Multiphase Ti<sub>0.3</sub>V<sub>0.3</sub>Mn<sub>0.2</sub>Fe<sub>0.1</sub>Ni<sub>0.1</sub> Alloy
by: Salma Sleiman, et al.
Published: (2021-08-01)

Dielectric Tunability Properties in (110)-Oriented Epitaxial 0.5Ba(Ti<sub>0.8</sub>Zr<sub>0.2</sub>)O<sub>3</sub>-0.5(Ba<sub>0.7</sub>Ca<sub>0.3</sub>)TiO<sub>3</sub> Thin Films Prepared by PLD Method
by: Bing Luo, et al.
Published: (2020-10-01)