Time-frequency Analysis of Multicomponent LFM signal based on Hough and Chirplet Transform
The Chirplet Transform (CT) is effective in the characterization of IF for mono-component linear-frequency-modulated signal. However, During the initialization process, using the peak of the time-frequency map of the short-time Fourier transform to fit the line is greatly affected by noise. For the...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2018-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | https://doi.org/10.1051/matecconf/201817303054 |
| Summary: | The Chirplet Transform (CT) is effective in the characterization of IF for mono-component linear-frequency-modulated signal. However, During the initialization process, using the peak of the time-frequency map of the short-time Fourier transform to fit the line is greatly affected by noise. For the multi-component signals, it is more difficult to distinguish and fit different IF lines. Since the Hough is good at a common algorithm for the line detection, the ridge edge fitting is replaced by the Hough transform in this paper. The experiment results show significant improvement in the obtained time-frequency representation. |
|---|---|
| ISSN: | 2261-236X |