Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide

• Main Authors: قاسم اسدپور اتوئی, fatemeh rajabi, seyed majid zabizadeh
• Format: Article
• Language: fas
• Published: Regional Information Center for Science and Technology (RICeST) 2018-06-01
• Series: تحقیقات علوم چوب و کاغذ ایران
• Subjects: Bleached Pulp; chemi-mechanical pulp (CMP); Sodium Hypochlorite; Optical properties; MECHANICAL PROPERTIES; Chemical Oxygen Demand
• Online Access: http://ijwpr.areeo.ac.ir/article_116174_a73a4452ec815f3f6c180bc65a220e0f.pdf
• ISSN: 1735-0913; 2383-112X

The objective of this study was the evaluation of optical, mechanical properties of chemi-mechanical pulp which were bleached by one and two stage bleaching sequence of hydrogen peroxide and sodium hypochlorite. Also the environmental effects of effluents from bleached paper liquor were studied. For this purpose, unbleached CMP pulp mixed of hardwoods was prepared from Mazandaran Wood and Paper mill. Then, these pulps were bleached using P (hydrogen peroxide), H (Sodium Hypochlorite), PH (Hydrogen Peroxide and Sodium Hypochlorite) and HP (Sodium Hypochlorite and hydrogen peroxide) stages. 60 gr/m2 hand sheets were prepared and the optical, mechanical properties of hand sheets and also their effluent bleaching liquor characteristics were measured and analyzed based on TAPPI and APHA Standards. The results showed that when peroxide was applied at the last stage of bleaching, then the properties such as tear, tensile and brightness have increased and yellowness has decreased. Generally, the role of single sequence of bleaching by P and two sequence of bleaching with HP were more effective than single sequence of H or unbleached pulp. Based on results, the highest and lowest COD load is related to bleaching liquor of H and PH respectively. Moreover, bleaching liquor of hydrogen peroxide had the highest BOD load and the lowest amount of BOD is related to PH sequence of bleaching.