Surface charge accumulation and pre-flashover characteristics induced by metal particles on the insulator surfaces of 1100 kV GILs under AC voltage
With the increase in the voltage and capacitance of gas-insulated transmission lines (GILs), the insulation failure of GIL has attracted more and more attention. Further understanding of the partial discharge (PD) and flashover characteristics of metal particles on the insulator surface, as well as...
Main Authors: | Li Xing, Liu Weidong, Xu Yuan, Chen Weijiang, Bi Jiangang |
---|---|
Format: | Article |
Language: | English |
Published: |
Wiley
2020-01-01
|
Series: | High Voltage |
Subjects: | |
Online Access: | https://digital-library.theiet.org/content/journals/10.1049/hve.2019.0222 |
Similar Items
-
Surface Flashover Induced by Metal Contaminants Adhered to Tri-Post Epoxy Insulators under Superimposed Direct and Lightning Impulse Voltages
by: Haddad, M., et al.
Published: (2022) -
Surface Flashover Characteristics of Epoxy Resin Composites in SF6/CF4 Gas Mixture with DC Voltage
by: Chen, J., et al.
Published: (2022) -
Development Process of Impulse Surface Flashover on Alumina Dielectrics in Vacuum
by: Tsuchiya, Kenji, et al.
Published: (2011) -
Improvement of surface flashover in vacuum
by: Shengtao Li
Published: (2020-02-01) -
Study on pollution flashover characteristic of insulators on 500 kV AC transmission lines in high-altitude area
by: Ruiping Huang, et al.
Published: (2019-01-01)