Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods

Topsoil field-saturated hydraulic conductivity, Kfs, is a parameter that controls the partition of rainfall between infiltration and runoff and is a key parameter in most distributed hydrological models. There is a mismatch between the scale of local in situ Kfs measurements and the scale at which t...

Full description

Bibliographic Details
Main Authors: Braud Isabelle, Desprats Jean-François, Ayral Pierre-Alain, Bouvier Christophe, Vandervaere Jean-Pierre
Format: Article
Language:English
Published: Sciendo 2017-09-01
Series:Journal of Hydrology and Hydromechanics
Subjects:
Online Access:https://doi.org/10.1515/johh-2017-0017
id doaj-c6fd2635832945f6a17c873679a7dd34
record_format Article
spelling doaj-c6fd2635832945f6a17c873679a7dd342021-09-06T19:40:48ZengSciendoJournal of Hydrology and Hydromechanics0042-790X2017-09-0165326427510.1515/johh-2017-0017johh-2017-0017Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methodsBraud Isabelle0Desprats Jean-François1Ayral Pierre-Alain2Bouvier Christophe3Vandervaere Jean-Pierre4Irstea, UR HHLY (Hydrology Hydraulics), BP 32108, 69616 Villeurbanne Cedex, France.BRGM D3E NRE, 1039 Rue Pinville, 34000Montpellier, France.LGEI – Institut des Sciences des Risques and UMR ESPACE (UMR7300 CNRS, “Antenne Cévenole”, Université de Nice-Sophia-Antipolis, Université d’Avignon et des Pays de Vaucluse), Ecole des mines d’Alès, 6 avenue de Clavières, 30319 Alès cedex, France.Hydrosciences, UMR5569 CNRS, IRD, University of Montpellier, Maison des Sciences de l’Eau, 34095MONTPELLIER, France.Institut des Géosciences de l’Environnement (IGE), (CNRS, Grenoble-INP, IRD, University of Grenoble-Alpes), UGA, CS40700, F-38058 Grenoble Cedex 9, France.Topsoil field-saturated hydraulic conductivity, Kfs, is a parameter that controls the partition of rainfall between infiltration and runoff and is a key parameter in most distributed hydrological models. There is a mismatch between the scale of local in situ Kfs measurements and the scale at which the parameter is required in models for regional mapping. Therefore methods for extrapolating local Kfs values to larger mapping units are required. The paper explores the feasibility of mapping Kfs in the Cévennes-Vivarais region, in south-east France, using more easily available GIS data concerning geology and land cover. Our analysis makes uses of a data set from infiltration measurements performed in the area and its vicinity for more than ten years. The data set is composed of Kfs derived from infiltration measurements performed using various methods: Guelph permeameters, double ring and single ring infiltrotrometers and tension infiltrometers. The different methods resulted in a large variation in Kfs up to several orders of magnitude. A method is proposed to pool the data from the different infiltration methods to create an equivalent set of Kfs. Statistical tests showed significant differences in Kfs distributions in function of different geological formations and land cover. Thus the mapping of Kfs at regional scale was based on geological formations and land cover. This map was compared to a map based on the Rawls and Brakensiek (RB) pedotransfer function (mainly based on texture) and the two maps showed very different patterns. The RB values did not fit observed equivalent Kfs at the local scale, highlighting that soil texture alone is not a good predictor of Kfs.https://doi.org/10.1515/johh-2017-0017infiltration methodstopsoil field-saturated hydraulic conductivityland covergeologymapping
collection DOAJ
language English
format Article
sources DOAJ
author Braud Isabelle
Desprats Jean-François
Ayral Pierre-Alain
Bouvier Christophe
Vandervaere Jean-Pierre
spellingShingle Braud Isabelle
Desprats Jean-François
Ayral Pierre-Alain
Bouvier Christophe
Vandervaere Jean-Pierre
Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
Journal of Hydrology and Hydromechanics
infiltration methods
topsoil field-saturated hydraulic conductivity
land cover
geology
mapping
author_facet Braud Isabelle
Desprats Jean-François
Ayral Pierre-Alain
Bouvier Christophe
Vandervaere Jean-Pierre
author_sort Braud Isabelle
title Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
title_short Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
title_full Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
title_fullStr Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
title_full_unstemmed Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
title_sort mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods
publisher Sciendo
series Journal of Hydrology and Hydromechanics
issn 0042-790X
publishDate 2017-09-01
description Topsoil field-saturated hydraulic conductivity, Kfs, is a parameter that controls the partition of rainfall between infiltration and runoff and is a key parameter in most distributed hydrological models. There is a mismatch between the scale of local in situ Kfs measurements and the scale at which the parameter is required in models for regional mapping. Therefore methods for extrapolating local Kfs values to larger mapping units are required. The paper explores the feasibility of mapping Kfs in the Cévennes-Vivarais region, in south-east France, using more easily available GIS data concerning geology and land cover. Our analysis makes uses of a data set from infiltration measurements performed in the area and its vicinity for more than ten years. The data set is composed of Kfs derived from infiltration measurements performed using various methods: Guelph permeameters, double ring and single ring infiltrotrometers and tension infiltrometers. The different methods resulted in a large variation in Kfs up to several orders of magnitude. A method is proposed to pool the data from the different infiltration methods to create an equivalent set of Kfs. Statistical tests showed significant differences in Kfs distributions in function of different geological formations and land cover. Thus the mapping of Kfs at regional scale was based on geological formations and land cover. This map was compared to a map based on the Rawls and Brakensiek (RB) pedotransfer function (mainly based on texture) and the two maps showed very different patterns. The RB values did not fit observed equivalent Kfs at the local scale, highlighting that soil texture alone is not a good predictor of Kfs.
topic infiltration methods
topsoil field-saturated hydraulic conductivity
land cover
geology
mapping
url https://doi.org/10.1515/johh-2017-0017
work_keys_str_mv AT braudisabelle mappingtopsoilfieldsaturatedhydraulicconductivityfrompointmeasurementsusingdifferentmethods
AT despratsjeanfrancois mappingtopsoilfieldsaturatedhydraulicconductivityfrompointmeasurementsusingdifferentmethods
AT ayralpierrealain mappingtopsoilfieldsaturatedhydraulicconductivityfrompointmeasurementsusingdifferentmethods
AT bouvierchristophe mappingtopsoilfieldsaturatedhydraulicconductivityfrompointmeasurementsusingdifferentmethods
AT vandervaerejeanpierre mappingtopsoilfieldsaturatedhydraulicconductivityfrompointmeasurementsusingdifferentmethods
_version_ 1717767708965076992