Characterization of Ti-25.5Al-13.5Nb-2.8Mo-1.8Fe Alloy Hot Deformation Behavior Through Processing Map

Characterization of Ti-25.5Al-13.5Nb-2.8Mo-1.8Fe Alloy Hot Deformation Behavior Through Processing Map

The isothermal compression tests of Ti-25. 5Al-13.5Nb-2.8Mo-1.8Fe (at.%) alloys were executed under a deformation temperature range of 950–1,100°C with a strain rate range of 0.001–1 s−1 for a total height reduction of 0.5. The isothermal compression deformation behavior was investigated based on fl...

Full description

Bibliographic Details
Main Authors:	Jun Cheng, Zhaoxin Du, Xiaoyong Zhang, Wen Zhang, Jinyang Gai, Jinshan Li
Format:	Article
Language:	English
Published:	Frontiers Media S.A. 2020-02-01
Series:	Frontiers in Materials
Subjects:	titanium alloy constitutive model processing map hot deformation behavior stress-strain curves
Online Access:	https://www.frontiersin.org/article/10.3389/fmats.2020.00023/full

Similar Items

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region
by: Jinyang Gai, et al.
Published: (2020-01-01)

Flow Stress Prediction and Hot Deformation Mechanisms in Ti-44Al-5Nb-(Mo, V, B) Alloy
by: Tianrui Li, et al.
Published: (2018-10-01)

Hot deformation behavior of new type of near β type Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe alloy
by: ZHOU Qiang, et al.
Published: (2019-06-01)

Characteristics of the Dynamic Recrystallization Behavior of Ti-45Al-8.5Nb-0.2W-0.2B-0.3Y Alloy during High Temperature Deformation
by: Lin Xiang, et al.
Published: (2017-07-01)

Anisotropy of the Microstructure and Tensile Properties in Ti-5Al-5Mo-5V-1Cr-1Fe near β Titanium Alloy during Hot Rolling and Heat Treatment
by: Xiaoyong Zhang, et al.
Published: (2018-11-01)

Hot Deformation Behavior of Homogenized Mg-13.5Gd-3.2Y-2.3Zn-0.5Zr Alloy via Hot Compression Tests
by: Zhimin Zhang, et al.
Published: (2018-11-01)

Microstructure and Hot Deformation Behavior of the Mg–8 wt.% Sn–1.5 wt.% Al Alloy
by: Zhaoqian Sun, et al.
Published: (2021-04-01)

Cold Rolling Deformation Characteristic of a Biomedical Beta Type Ti–25Nb–3Zr–2Sn–3Mo Alloy Plate and Its Influence on α Precipitated Phases and Room Temperature Mechanical Properties During Aging Treatment
by: Jun Cheng, et al.
Published: (2020-10-01)

Effect of Laser Annealing on Hot-stretching Properties of 1Cr5Mo Steel Welded Joints
by: GUO Wei, et al.
Published: (2018-02-01)

Hot Ductility of TiNb IF Steel Slab after Hot Torsion Testing
by: Jana Konrádyová, et al.
Published: (2019-07-01)

Influence of Isothermal ω Transitional Phase-Assisted Phase Transition From β to α on Room-Temperature Mechanical Performance of a Meta-Stable β Titanium Alloy Ti−10Mo−6Zr−4Sn−3Nb (Ti-B12) for Medical Application
by: Jun Cheng, et al.
Published: (2021-01-01)

Coherent ω phase induced yield strength improvement in Ti-19Nb-1.5Mo-4Zr-8Sn alloy
by: Siyun Li, et al.
Published: (2020-12-01)

Comparison of the Cracking Behavior of Powder Metallurgy and Ingot Metallurgy Ti-5Al-5Mo-5V-3Cr Alloys during Hot Deformation
by: Qinyang Zhao, et al.
Published: (2019-02-01)

The Formation of Strong {100} Texture by Dynamic Strain-Induced Boundary Migration in Hot Compressed Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
by: Kai Li, et al.
Published: (2017-10-01)

Corrosion Behavior of As-Cast Ti–10Mo–6Zr–4Sn–3Nb and Ti–6Al–4V in Hank’s Solution: A Comparison Investigation
by: Jun Cheng, et al.
Published: (2021-12-01)

The Effects of Hot-Pack Coating Materials on the Pack Rolling Process and Microstructural Characteristics during Ti-46Al-8Nb Sheet Fabrication
by: Haohong Huang, et al.
Published: (2020-02-01)

Constitutive Equation and Hot Compression Deformation Behavior of Homogenized Al–7.5Zn–1.5Mg–0.2Cu–0.2Zr Alloy
by: Jianliang He, et al.
Published: (2017-10-01)

Simulation of the Hot Deformation and Fracture Behavior of Reduced Activation Ferritic/Martensitic 13CrMoNbV Steel
by: Asad Shaikh, et al.
Published: (2020-01-01)

The Effect of Cold Swaging Deformation on the Microstructures and Mechanical Properties of a Novel Metastable β Type Ti–10Mo–6Zr–4Sn–3Nb Alloy for Biomedical Devices
by: Jun Cheng, et al.
Published: (2020-08-01)

Effect of Boron and Titanium Addition on the Hot Ductility of Low-Carbon Nb-Containing Steel
by: Liu Wei-Jian, et al.
Published: (2015-12-01)

Deformation behavior and microstructure evolution of as-cast Ti2ZrMo0.5Nb0.5 high entropy alloy
by: Lijuan Xu, et al.
Published: (2021-07-01)

Microstructure and Strengthening-Toughening Mechanism of Nitrogen-Alloyed 4Cr5Mo2V Hot-Working Die Steel
by: Jinbo Gu, et al.
Published: (2017-08-01)

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation
by: Qian Cheng, et al.
Published: (2021-03-01)

Effects of Sn and Sb on the Hot Ductility of Nb+Ti Microalloyed Steels
by: Chunyu He, et al.
Published: (2020-12-01)

Investigation on removal of Nb from Nb-bearing hot metal with CO<sub>2</sub>
by: Z. Y. Xu, et al.
Published: (2018-01-01)

On the Microstructure and Isothermal Oxidation at 800, 1200, and 1300 °C of the Al-25.5Nb-6Cr-0.5Hf (at %) Alloy
by: Ofelia Hernández-Negrete, et al.
Published: (2019-08-01)

Shock-Induced Hot Spot Formation and Spalling in 1,3,5-trinitroperhydro-1,3,5-triazine Containing a Cube Void
by: Yaping Zhang, et al.
Published: (2019-05-01)

Hot deformation behavior and constitutive equation of TB8 titanium alloy with a lamellar structure of α phase
by: ZHOU Ya-li, et al.
Published: (2021-01-01)

Effect of Ti on Microstructure and Mechanical Properties of Hot-extruded Cu-15Ni-8Sn Alloy
by: ZHAO Chao, et al.
Published: (2018-11-01)

Mechanical properties and precipitation behavior of high strength hot-rolled ferritic steel containing Nb and V
by: Esther Hutten, et al.
Published: (2021-09-01)

Constitutive Modeling of the Flow Stress Behavior for the Hot Deformation of Cu-15Ni-8Sn Alloys
by: Dongxin Niu, et al.
Published: (2020-12-01)

Effects of rolling reduction on Burgers orientation relationship and slip behavior of a Ti–5.5Mo–7.2Al–4.5Zr–2.6Sn–2.1Cr alloy
by: Duoduo Wang, et al.
Published: (2021-11-01)

Practical Use of Hot-Forged-Type Ti-42Al-5Mn and Various Recent Improvements
by: Toshimitsu Tetsui
Published: (2021-08-01)

Hot Deformation Behavior of Powder Metallurgy Ti-14Mo-2.1Ta-0.9Nb-7Zr Alloy
by: MA Lin, et al.
Published: (2018-10-01)

Oxidations behavior of C, Si, Mn, P, Nb in Nb-bearing hot metal by bottom blowing oxygen
by: Z. Y. Xu, et al.
Published: (2019-01-01)

4-Phenyl-2,5,5a,6,7,8,9,9a-hexahydro-1H-1,5-benzodiazepine-2-thione ethanol monosolvate
by: Wedad Al Garadi, et al.
Published: (2018-09-01)

Investigation of the Dynamic Recovery and Recrystallization of Near-β Titanium Alloy Ti-55511 during Two-Pass Hot Compression
by: Hande Wang, et al.
Published: (2021-02-01)

The Optimum Process to Produce High-Strength Cast/Forged Al–8%Zn–2.5%Mg–1%Cu Alloy
by: Teng-Shih Shih, et al.
Published: (2019-09-01)

Hot Carrier Stress Sensing Bulk Current for 28 nm Stacked High-k nMOSFETs
by: Chii-Wen Chen, et al.
Published: (2020-12-01)

Type of Primary Nb5Si3 and Precipitation of Nbss in αNb5Si3 in a Nb-8.3Ti-21.1Si-5.4Mo-4W-0.7Hf (at.%) Near Eutectic Nb-Silicide-Based Alloy
by: Conor McCaughey, et al.
Published: (2018-06-01)