Experimental Analysis of the Effect of Geometric Shape of Submerged Vanes on Sedimentation Flows at Lateral Intake Entrance in River Bends

Experimental Analysis of the Effect of Geometric Shape of Submerged Vanes on Sedimentation Flows at Lateral Intake Entrance in River Bends

The separation zone in the entrance of intake channel has no effect on flow discharge but it reduces the effective cross-sectional area of the intake, as well as the bed load, which enters the intake due to low velocity flow deposits in this area. Therefore, knowing the dimension of the separation z...

Full description

Bibliographic Details
Main Authors:	HOSSEIN Habibi, Alireza Masjedi, Mohammad Hossein Purmohammadi, Amir Abbas Kamanbedast, Amin Bordbar
Format:	Article
Language:	fas
Published:	Shahid Chamran University of Ahvaz 2019-06-01
Series:	علوم و مهندسی آبیاری
Subjects:	submerged vanes separation zone bed load sediment lateral intake
Online Access:	http://jise.scu.ac.ir/article_14343_fbfd5c4ce3533236befdea55c3de59f9.pdf

Similar Items

Investigation of the Effects of Submerged Vanes and Spur Dikes on Sediment Control at Lateral Intakes by SSIIM2 Software
by: Edris Maroofi nia, et al.
Published: (2016-12-01)

Experimental Investigation of Submerged Vanes’ Shape effect on river-bend stability
by: Gholam Abbass Barani, et al.
Published: (2013-03-01)

Experimental Investigation of Flat, Curved and Angled Submerged Vane’s Placement Effect on Bridge Pier Scouring
by: Leyla Parchami, et al.
Published: (1970-01-01)

Numerical Simulation of Channel Flow Using Submerged Vane in River Arrangements
by: Bestami TAŞAR, et al.
Published: (2021-03-01)

Generation of artificial transverse circulation in an open channel flow by submerged vanes
by: Alexey V. Klovsky, et al.
Published: (2019-09-01)

Effects of curvature submerge vane in efficiency of vortex settling basin
by: Amin Hajiahmadi, et al.
Published: (2014-06-01)

Experimental Study of the Effect of Displacement of Vanes Submerged at Channel Width on Distribution of Velocity and Shear Stress in a 180 Degree Bend
by: Ch. Abdi Chooplou, et al.
Published: (2019-01-01)

Submerged Vane Technology in Colombia: Five Representative Projects
by: Carlos Rodríguez-Amaya, et al.
Published: (2020-03-01)

Velocity rate of screw streams in the site of submerged vanes
by: Alexey V. Klovsky, et al.
Published: (2020-06-01)

An Experimental Study of Current Deflecting Wall-Sill Effect on Sediment Control at Lateral Intake
by: Ghorban Mahtabi, et al.
Published: (2012-10-01)

Flow Pattern Investigation at Bridge Abutment with and without Installed Submerged Vane
by: Kheiralah Khademi, et al.
Published: (2014-09-01)

Effect of a Submerged Vane-Field on the Flow Pattern of a Movable Bed Channel with a 90° Lateral Diversion
by: Joana Baltazar, et al.
Published: (2021-03-01)

Simulation of flow pattern at rectangular lateral intake with different dike and submerged vane scenarios
by: Hojat Karami, et al.
Published: (2017-07-01)

Numerical Simulation of Flow Pattern around the Bridge Pier with Submerged Vanes
by: Sajedeh Azizi, et al.
Published: (2016-12-01)

Enhancing sediment distribution at the vicinity of power plant intakes using double rows of vanes and groins (Case study: New tebbin power plant)
by: Sayed Mahgoub
Published: (2013-12-01)

Laboratory Investigation of the Effect of the Size of Orifice on the Performance of Curvature Submerge Vanes for Sediment Leaching of the Vortex Settling Basin’s Floor
by: Amin Hajiahmadi, et al.
Published: (2016-01-01)

Study of Streamlines under the Influence of Displacement of Submerged Vanes in Channel Width, and at the Upstream Area of a Cylindrical Bridge Pier in a 180 Degree Sharp Bend
by: Chonoor Abdi Chooplou, et al.
Published: (2018-06-01)

Submerged vane-attached to the abutment as scour countermeasure
by: Mahmood Shafai Bejestan, et al.
Published: (2015-09-01)

Uji Model Fisik Pengendalian Elevasi Dasar Sungai di Sekitar Intake Polder Alabio, Kabupaten Hulu Sungai Utara, Propinsi Kalimantan Timur dengan menggunakan Vane
by: Joko Nugroho, et al.
Published: (2021-08-01)

Optimization Study of Guide Vanes for the Intake Fan-Duct Connection Using CFD
by: Juan Pablo Hurtado, et al.
Published: (2021-08-01)

Scale Effect of Intake-Entrance Profile on Air-Entraining Vortex
by: Kerem TASTAN, et al.
Published: (2018-09-01)

Experimental Investigation the effect of slot on bed scouring in Series Triangular of Vane Attached to The Bank in 90 Degree Mild Bend
by: Mohsen Dorosti, et al.
Published: (1970-01-01)

Scour control around Submerged pipeline on the river bed using an impermeable Spoiler
by: V. Jabari, et al.
Published: (2021-03-01)

Experimental Analysis of The Effect of Bandal-like Spur Dike Submergence on Bed Topography In 90 Degree Bend
by: Mohsen Jalili, et al.
Published: (2018-01-01)

Decreased scour on an external river bend using two-dimensional numerical model, in la Perla-Florida and Cantagallo sectors of Rímac river
by: Ravines, Mauricio Bazan, et al.
Published: (2021)

Vane Sensor System in Small Strain Oscillatroy Testing
by: Junus Silvara, et al.
Published: (2001-10-01)

Complex approach to aerodynamic design of inlet ducts with submerged vortex-free air intakes
by: A. V. Kornev, et al.
Published: (2017-07-01)

Fluid Flow Simulations of a Vane Separator
by: Aage I. Jøsang, et al.
Published: (2002-01-01)

The Influence of Debris Cages on Critical Submergence of Vertical Intakes in Reservoirs
by: Allen, Skyler D
Published: (2008)

Experimental Study of the Effects of Immersed Vanes Distance from the Bank on Erosion Pattern and Bed Sedimentation
by: hossein salaj mahmoodi, et al.
Published: (2017-11-01)

Discharge Coefficient in Vertical Intakes with Additional Plates
by: Vadoud Naderi, et al.
Published: (2014-05-01)

Simulation of the Filling Capability in Vane Pumps
by: Massimo Rundo, et al.
Published: (2019-01-01)

STUDY OF TORQUE NONUNIFORMITY IN DOUBLE-ACTION HYDRAULIC ROTARY VANE MO-TORS
by: V. Yu. Savin, et al.
Published: (2020-04-01)

Effects of convex curvature on adiabatic effectiveness for a film cooled turbine vane
by: Winka, James R
Published: (2013)

Ooi K. T., Shakya P. A Simulation studies of a coupled vane compressor / trans. from Engl. M. A. Fedorova
by: M. A. Fedorova
Published: (2020-03-01)

Experimental Investigation of Bed Topography of A 90 Degree Mild Bend With Triangular Vane Attached to The Bank
by: Pardis Badri, et al.
Published: (2016-04-01)

Development of a Rotational Shear Vane for use in Avalanche Safety Work
by: Halsegger, Michael
Published: (2010)

Smart Coordinate Measuring Machine (CMM) Inspection for Turbine Guide Vanes with Trend Line and Geometric Profile Tolerance
by: Marcin Jamontt, et al.
Published: (2021-02-01)

Mechanical Analysis and Performance Optimization for the Lunar Rover’s Vane-Telescopic Walking Wheel
by: Lu Yang, et al.
Published: (2020-08-01)

The Effect of Installing Immerse Vanes on Scouring Around Bridge Abutments
by: Atefe Heydari, et al.
Published: (2019-06-01)