| Summary: | As part of a verification model of antibiotic therapy in cranioplasty, we evaluated the impregnation efficiency of interporous calcium phosphate materials with saline under atmospheric pressure and compared it to the efficiency of using the decompression method established by the Japanese Industrial Standard, under which pressure is reduced by 10 kPa. Five types of material formed in 1 mL cubes were selected as test samples: two consisting of hydroxyapatite (HAp) with 85% and 55% porosity and three of β-tricalcium phosphate (β-TCP) with 75%, 67%, and 57% porosity. All test samples showed an impregnation ratio of more than 70%, except for the HAp sample with 55% porosity, which had a ratio of approximately 50%. These high ratios were achieved at only 15 min. The impregnation effects were likely dependent on porosity and were independent of base material, either HAp or β-TCP. Obtaining sufficient impregnation and antimicrobial efficacy in materials with low porosity, which are commonly used in cranioplasty, would require an increased volume of antibiotics rather than increased duration of impregnation. Our findings will enable the simple preparation of drug-impregnated calcium phosphate materials, even in operating rooms not equipped with a large decompression device.
|
|---|
